


| Kipengele | Thamani |
|---|---|
| Bidhaa | Safety Light Curtain Type 2 |
| PFHD | 6.37 × 10-9 |
| MTTFD | 100 years or more |
| Maelezo | Min. sensing object ø27 mm ø1.063 in type (20 mm0.787 inbeam pitch) |
| Nyenzo | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| Lami ya boriti | 20 mm0.787 in |
| Vifaa | SF2B-TR27 (Test rod): 1 No. |
| Nambari ya Sehemu | SF2B-H16-P |
| Jina la bidhaa | Safety Light Curtain Type 2 SF2B Ver.2 |
| Volti ya nguvu | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| Muda wa majibu | OFF response: 15 ms or lessON response: 40 to 60 ms |
| Nambari ya Bidhaa | SF2B-H16-P |
| Upanuzi wa kebo | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| Aina ya uendeshaji | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| Unyevu wa mazingira | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Kipengee kinachotoa | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Upinzani wa mshtuko | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Mbinu ya kuunganisha | Connector |
| Urefu wa kinga | 312 mm12.283 in |
| Mwangaza wa mazingira | Incandescent light: 3,500 lx or less at the light-receiving face |
| Halijoto ya mazingira | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| Matumizi ya sasa | Emitter: 40 mA or lessReceiver: 60 mA or less |
| Kitu cha chini cha kuhisi | ø27 mm ø1.063 in opaque object |
| Idadi ya njia za boriti | 16 |
| Upinzani wa mtetemo | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Upinzani wa insulation | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Pato la msaidizi (Aux) | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| Kitendaji cha kusimamisha utoaji wa chafu | Incorporated |
| Mbinu ya ulandanishi | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| Pembe ya uwazi yenye ufanisi | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| Viwango vinavyotumika: Japani | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| Utii wa maagizo ya kuashiria CE | Machinery Directive, EMC Directive, RoHS Directive |
| Viwango vinavyotumika: Ulaya (EU) | EN 61496-1 (Type 2), EN 55011 |
| Matokeo ya udhibiti (OSSD 1, OSSD 2) | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| Kazi ya kuzuia kuingiliwa | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| Viwango vinavyotumika: Amerika Kaskazini | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| Kipengele cha ufuatiliaji wa kifaa cha nje | Incorporated |
| Matokeo saidizi (Aux): Hali ya uendeshaji | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| Uzito (Jumla ya mtoaji na mpokeaji) | 400 g approx. |
| Pato la msaidizi (Aux): Mzunguko wa ulinzi | Incorporated |
| Viwango vinavyotumika: Kiwango cha kimataifa | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| Upinzani wa mazingira: Kiwango cha ulinzi | IP65 (IEC) (*IP67 is later than Ver.2) |
| Matokeo ya udhibiti (OSSD 1, OSSD 2): Hali ya uendeshaji | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| Matokeo ya udhibiti (OSSD1, OSSD2): Mzunguko wa ulinzi | Incorporated |
| Upinzani wa mazingira: Volti ya nguvu ya dielectric | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji