Kipatikana Bidhaa Maarufu
UHGTC111
UHGTC111 HG-TC111 PANASONIC HG-T Laser Displacement Sensor. High functionality slave controller, NPN output
$0.00USD
3382 kwenye hisa
Vipimo Muhimu
:When communication unitis connected
Bidhaa:Controller
Kebo:0.15 mm27-core composite cable, 2 m6.562 ftlong
Maelezo:Slave unit / High performance type
Taarifa za Msambazaji
PANASONIC
Bidhaa: 4316
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| When communication unitis connected | |
| Bidhaa | Controller |
| Kebo | 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| Maelezo | Slave unit / High performance type |
| Nyenzo | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Uzito halisi | 140 g approx. |
| Nambari ya Sehemu | HG-TC111 |
| Vitengo 1 hadi 7 | 1 to 6 units |
| Jina la bidhaa | Thru-beam Type Digital Displacement Sensor HG-T |
| Vitengo 8 hadi 15 | 7 to 14 units |
| Onyesho la masafa | -199.999 to 199.999 mm-7.874 to 7.874 in |
| Kiwango cha sampuli | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| Nambari ya Bidhaa | HG-TC111 |
| Volti ya usambazaji | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Kiwango cha uchafuzi wa mazingira | 2 |
| Ubora wa onyesho | 1 μm0.039 mil |
| Urefu wa uendeshaji | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Matumizi ya sasa | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| Utiifu wa kanuni | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Kichwa cha kitambuzi kinachotumika | HG-T1010、HG-T1110 |
| Kubadilisha pembejeo za nje | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| Kubadilisha pato la nje | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| Idadi ya wastani (muda wa majibu) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Idadi ya vitengo vya watumwa vilivyounganishwa | Maximum sink current and sourcecurrent of control output |
| Upinzani wa mazingira: Ulinzi | IP40(IEC) |
| Matokeo ya analogi: Matokeo ya sasa ya analogi | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Pato la analogi: Pato la volteji ya analogi | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| Ingizo la nje (Ingizo la 1, Ingizo la 2, Ingizo la 3) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| Idadi ya juu zaidi ya vidhibiti vinavyoweza kuunganishwa | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| Upinzani wa mazingira: Unyevu wa mazingira | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Upinzani wa mazingira: Upinzani wa mshtuko | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| Udhibiti wa matokeo (Tokeo 1, Tokeo 2, Tokeo 3) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Upinzani wa mazingira: Joto la kawaida | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| Upinzani wa mazingira: Upinzani wa mtetemo | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| Upinzani wa mazingira: Upinzani wa insulation | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Upinzani wa kimazingira: Ustahimilivu wa volteji | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| Ingizo la nje (Ingizo la 1, Ingizo la 2, Ingizo la 3): Muda wa kuingiza | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| Towe la kudhibiti (Towe la 1, Towe la 2, Towe la 3): Towe la kengele | Open when alarm occurs |
| Udhibiti wa matokeo (Tokeo 1, Tokeo 2, Tokeo 3): Matokeo ya hukumu | N.O. / N.C. switching type |
| Udhibiti wa matokeo (Tokeo 1, Tokeo 2, Tokeo 3): Ulinzi wa mzunguko mfupi | Incorporated (automatic reset type) |
Maelezo ya Bidhaa
HG-TC111_Controller_Thru-beam Type Digital Displacement Sensor HG-T_Slave unit / High performance type
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
