Kipatikana Bidhaa Maarufu
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00USD
4292 kwenye hisa
Vipimo Muhimu
Bidhaa:Contact-Type Digital Displacement Sensor
Tamko:Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
Kiharusi:10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Uzito:Net weight: 80 g approx.
Taarifa za Msambazaji
PANASONIC
Bidhaa: 4316
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Bidhaa | Contact-Type Digital Displacement Sensor |
| Tamko | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| Kiharusi | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Uzito | Net weight: 80 g approx. |
| Maelezo | Air-driven type10 mm0.394 intype General purpose |
| Nyenzo | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| Kifaa cha ziada | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| Azimio | 0.5 μm0.02 mil |
| Nambari ya Sehemu | HG-S1010-AC |
| Jina la bidhaa | Contact-Type Digital Displacement Sensor HG-S |
| Kioevu kinachoweza kutumika | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| Kiwango cha sampuli | 1 ms |
| Nambari ya Bidhaa | HG-S1010-AC |
| Mrija unaotumika | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| Nguvu ya kupimia | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| Kiwango cha kupimia | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Mbinu ya kutuliza | Capacitor grounding |
| Kiwango cha uchafuzi wa mazingira | 2 |
| Kipengele cha kubadilishana moto | Incorporated |
| Urefu wa uendeshaji | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Kiashiria cha uendeshaji | Equipped (2-color LED: Orange / Green) |
| Kiasi cha kupotoka kwa ncha | 35 μm1.378 mil(typical value) |
| Kidhibiti kinachotumika | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| Upinzani wa insulation | 100 MΩ or more at 250 V DC |
| Utiifu wa kanuni | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Kiwango cha shinikizo la kufanya kazi | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| Usahihi wa dalili (PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| Mbinu ya kugundua nafasi | Optical absolute linear encoder method |
| Uwezo wa kupinga shinikizo | 0.2 MPa |
| Upinzani wa mazingira: Ulinzi | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| Upinzani wa mazingira: Unyevu wa mazingira | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Upinzani wa mazingira: Upinzani wa mshtuko | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| Upinzani wa mazingira: Joto la kawaida | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Upinzani wa mazingira: Upinzani wa mtetemo | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
Maelezo ya Bidhaa
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
