


| Kipengele | Thamani |
|---|---|
| Bidhaa | Rectangular-shaped Inductive Proximity Sensor |
| Kebo | 0.15 mm23-core oil, heat and cold resistant cabtyre cable, 1 m3.281 ftlong |
| Matokeo | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less(between output and +V)- Residual voltage: 2 V or less (at 100 mA source current) |
| Maelezo | PNP output |
| Nyenzo | Enclosure: PBTIndicator part: Polyester |
| Hysteresis | 20 % or less of operation distance(with standard sensing object) |
| Uzito halisi | 15 g approx. |
| Ulinzi | IP68 (IEC), IP68g (JEM)(Note) Panasonic Electric Works SUNX's IP68 test method1. Immerse at 0 m below 0 ℃+32 ℉water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃+158 ℉water surface and leave for 30 min.2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.3. Leave in water at a depth of 1 m3.281 ftin water for 500 hours.4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. |
| Nambari ya Sehemu | GX-H6A-P |
| Jina la bidhaa | Rectangular-shaped Inductive Proximity Sensor GX-F/H |
| Kurudia | Along sensing axis, perpendicular to sensing axis: 0.04 mm0.002 inor less |
| Nambari ya Bidhaa | GX-H6A-P |
| Volti ya usambazaji | 12 to 24 V DC +10/-15 % Ripple P-P 10 % or less |
| Upanuzi wa kebo | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Unyevu wa mazingira | 45 to 85 % RH, Storage: 35 to 95 % RH |
| Upinzani wa mshtuko | 10,000 m/s2acceleration (1,000 G approx.) in X, Y and Z directions three times each |
| Halijoto ya mazingira | -25 to +70 ℃-13 to +158 ℉, Storage: - 40 to +85 ℃- 40 to +185 ※ |
| Matumizi ya sasa | 15 mA or less |
| Kiashiria cha uendeshaji | Orange LED(lights up when the output is ON) |
| Kiwango thabiti cha kuhisi | 0 to 1.3 mm0 to 0.051 in(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. |
| Upinzani wa mtetemo | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (Max. 20 G) in X, Y and Z directions for two hours each |
| Upinzani wa insulation | 50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Umbali wa juu zaidi wa uendeshaji | 1.6 mm0.063 inplus or minus 8 %(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. |
| Kiwango cha juu cha majibu | 400 Hz |
| Matokeo: Operesheni ya matokeo | Normally open |
| Kitu cha kawaida cha kuhisi | Iron sheet 12 × 12 × t 1 mm0.472 × 0.472 × t 0.039 in |
| Ustahimilivu wa volteji | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Matokeo: Aina ya matumizi | DC-12 or DC-13 |
| Kanuni na vyeti vinavyotumika | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Tofauti ya masafa ya kuhisi: Sifa za Voltage | Within plus or minus 2 % for +10/-15 % fluctuation of the supply voltage |
| Tofauti ya masafa ya kuhisi: Sifa za halijoto | Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : Within plus or minus 8 % of sensing range at +23degrees +73.4degrees Fahrenheit . |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji