Kipatikana Bidhaa Maarufu
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00USD
4554 kwenye hisa
Vipimo Muhimu
Bidhaa:Digital Fiber Sensor
Kebo:0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Uzito:Net weight: 60 g approx.Gross weight: 100 g approx.
Maelezo:Cable type
Taarifa za Msambazaji
PANASONIC
Bidhaa: 4316
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Bidhaa | Digital Fiber Sensor |
| Kebo | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Uzito | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Maelezo | Cable type |
| Nyenzo | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Kifaa cha ziada | FX-MB1 (Amplifier protection seal): 1 set |
| Ulinzi | IP40 (IEC) |
| Nambari ya Sehemu | FX-505-C2 |
| Jina la bidhaa | Digital Fiber Sensor FX-500 Ver.2 |
| Pato la analogi | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Muda wa majibu | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Ingizo la nje | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Nambari ya Bidhaa | FX-505-C2 |
| Volti ya usambazaji | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Kitendaji cha kipima muda | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Upanuzi wa kebo | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Mipangilio mbalimbali | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Matumizi ya nguvu | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| Tokeo 1, Tokeo 2 | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Halijoto ya mazingira | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Mpangilio wa unyeti | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Kipengele cha kipima muda: Kipindi cha kipima muda | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Kipengee kinachotoa moduli (kilichorekebishwa) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Utii wa maagizo ya kuashiria CE | EMC Directive, RoHS Directive |
| Kitendakazi cha kuweka kiasi cha utoaji | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Kazi ya kuzuia kuingiliwa | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| Matokeo 1, Matokeo 2: Pointi za matokeo | 2 points |
| Kitendakazi kinachowezekana cha kuingiza data kutoka nje | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| Tokeo 1, Tokeo 2: Uendeshaji wa Tokeo | Switchable either Light-ON or Dark-ON by L/D mode |
| Kiwango cha kuonyesha mwangaza wa matukio | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Ingizo la nje (linaloweza kubadilishwa na Towe 2) | - |
| Pato 1, Pato 2: Ulinzi wa mzunguko mfupi | Incorporated |
Maelezo ya Bidhaa
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
