


| Kipengele | Thamani |
|---|---|
| Bidhaa | Digital Fiber Sensor |
| Matokeo | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 100 mA sink current) |
| Uzito | Net weight: 15 g approx.Gross weight: 35 g approx. |
| Maelezo | Standard type |
| Nyenzo | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| Kifaa cha ziada | FC-FX-1(Protection cover): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| Nambari ya Sehemu | FX-101-Z |
| Urefu wa kebo | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| Jina la bidhaa | Digital Fiber Sensor FX-100 |
| Muda wa majibu | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| Ingizo la nje | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +2 V DC(Source current 0.5 mA or less)- Input impedance: 10 kOhm approx. |
| Nambari ya Bidhaa | FX-101-Z |
| Volti ya usambazaji | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kitendaji cha kipima muda | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| Onyesho la kidijitali | 4 digits (green) + 4 digits (red) LCD display |
| Unyevu wa mazingira | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Upinzani wa mshtuko | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Mbinu ya muunganisho | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| Matumizi ya nguvu | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| Mwangaza wa mazingira | Incandescent light: 3,000 lx or less at the light-receiving face |
| Halijoto ya mazingira | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| Kiashiria cha uendeshaji | Orange LED (lights up when the output is ON) |
| Mpangilio wa unyeti | 2-point teaching / Limit teaching / Full-auto teaching |
| Upinzani wa mtetemo | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Upinzani wa insulation | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Matokeo: Operesheni ya matokeo | Selectable either Light-ON or Dark-ON, at SET mode |
| Ustahimilivu wa volteji | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| Kipengee kinachotoa moduli (kilichorekebishwa) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Utii wa maagizo ya kuashiria CE | EMC Directive, RoHS Directive |
| Matokeo: Ulinzi wa mzunguko mfupi | Incorporated |
| Kitendakazi cha kuweka kiasi cha utoaji | 3-level + Auto setting (from production in December 2007) |
| Kazi ya kuzuia kuingiliwa | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| Kipengele cha kurekebisha unyeti laini | Incorporated |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji