


| Kipengele | Thamani |
|---|---|
| Bidhaa | Adjustable Range Reflective Photoelectric Sensor |
| Kebo | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Matokeo | Relay contact 1a- Switching capacity: 2 50 V AC 3 A (resistive load), 30 V DC 3 A (resistive load)- Electrical life: 100,000 or more switching operations (switching frequency 1,200 operations/hour)- Mechanical life: 50 million or more switching operations (switching frequency 18,000 operations/hour) |
| Uzito | Net weight: 100 g approx. |
| Maelezo | Multi-voltage [With timer] |
| Nyenzo | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Kifaa cha ziada | Adjusting screwdriver: 1 pc. |
| Hysteresis | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Ulinzi | IP67 (IEC) |
| Nambari ya Sehemu | EQ-502T |
| Urefu wa kebo | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Jina la bidhaa | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Hali ya kuhisi | - |
| Muda wa majibu | 20 ms or less (depends on the setting timer period) |
| Nambari ya Bidhaa | EQ-502T |
| Volti ya usambazaji | 24-240 V AC ±10 % or 12 to 240 V DC ±10 %Ripple P-P 10 % or less |
| Kitendaji cha kipima muda | Incorporated with variable (0.1 to 5 sec.) ON-delay/OFF-delay timer |
| Masafa yanayoweza kurekebishwa | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Unyevu wa mazingira | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Kipengee kinachotoa | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Upinzani wa mshtuko | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Mbinu ya muunganisho | Screw-on terminal connection |
| Kirekebisha umbali | 2-turn mechanical adjuster with indicator |
| Kipengele cha kupokea | 2-segment photodiode |
| Mwangaza wa mazingira | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Halijoto ya mazingira | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Kiashiria cha uendeshaji | Orange LED (lights up when the output is ON) |
| Kiashiria cha uthabiti | Green LED (lights up under stable operating condition) |
| Upinzani wa mtetemo | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Upinzani wa insulation | 100 MOhm , or more, with 500 V DC megger among supply terminals, non-supply metal parts and relay contact output terminals as well as between relay contacts |
| Matokeo: Operesheni ya matokeo | Switchable either Detection-ON or Detection-OFF |
| Ustahimilivu wa volteji | 2,000 V AC for one min. among supply terminals, non-supply metal parts and relay contact output terminals, 1,000 V AC for one min. between relay contacts |
| Nguvu / Matumizi ya sasa | AC: 5 VA or lessDC: 4 W or less |
| Utii wa maagizo ya kuashiria CE | Low Voltage Directive, EMC Directive, RoHS Directive |
| Matokeo: Ulinzi wa mzunguko mfupi | - |
| Kipengele cha kuzuia kuingiliwa kiotomatiki | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Kiwango cha kuhisi (katika umbali wa juu zaidi wa kuweka) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji