Kipatikana Bidhaa Maarufu
SPT 16/ 1-V-10,0 BU
SPT 16/ 1-V-10,0 BU 1712550 PHOENIX CONTACT Terminal for printed circuit board, rated voltage: 1000 V, pitch..
$0.00USD
4761 kwenye hisa
Vipimo Muhimu
:0.75 mm² ... 16 mm² (Push-in connection)
Dokezo:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Aina:PC terminal block can be aligned
Lami:10 mm
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| 0.75 mm² ... 16 mm² (Push-in connection) | |
| Dokezo | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Aina | PC terminal block can be aligned |
| Lami | 10 mm |
| Matokeo | Test passed |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Masafa | 10 - 150 - 10 Hz |
| Upana [w] | 11.8 mm |
| Urefu [h] | 35.4 mm |
| Urefu [l] | 24.7 mm |
| Mpangilio wa pini | Linear pinning |
| Nafasi ya kubandika | 15 mm |
| Kasi ya kufagia | 1 octave/min |
| Halijoto | 850 °C |
| Kuongeza kasi | 5g (60.1 Hz ... 150 Hz) |
| Mstari wa bidhaa | COMBICON Terminals XL |
| Aina ya bidhaa | Printed circuit board terminal |
| Kipenyo cha shimo | 1.7 mm |
| Aina ya kupachika | Wave soldering |
| Vipimo | IEC 60999-1:1999-11 |
| Idadi ya safu mlalo | 1 |
| Vipimo vya pini | 1.2 x 1 mm |
| Familia ya bidhaa | SPT 16/..-V |
| Rangi (Nyumba) | blue (5015) |
| Maelekezo ya majaribio | X-, Y- and Z-axis |
| Marekebisho ya makala | 00 |
| Nyenzo ya mawasiliano | Cu alloy |
| Urefu uliowekwa | 31.3 mm |
| Urefu wa kukatwa | 18 mm |
| Muda wa kuambukizwa | 5 s |
| Mbinu ya muunganisho | Push-in spring connection |
| Aina ya kifungashio | packed in cardboard |
| Mkondo wa nominella IN | 76 A |
| Volti ya kawaida ya Umoja wa Mataifa | 1000 V |
| Maelezo kuhusu uendeshaji | The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation |
| Mchoro wa vipimo | |
| Nyenzo za kuhami joto | PA |
| Idadi ya nafasi | 1 |
| Idadi ya uwezo | 1 |
| Volti iliyokadiriwa (II/2) | 1000 V |
| Sehemu ya msalaba ya nominella | 16 mm² |
| Idadi ya miunganisho | 1 |
| Volti iliyokadiriwa (III/2) | 1000 V |
| Volti iliyokadiriwa (III/3) | 1000 V |
| Urefu wa pini ya solder [P] | 4.1 mm |
| Muda wa jaribio kwa kila mhimili | 2.5 h |
| Sifa za uso | Tin-plated |
| Kikundi cha nyenzo za kuhami joto | I |
| Pini za solder kwa kila uwezo | 6 |
| CTI kulingana na IEC 60112 | 600 |
| Volti ya kuongezeka iliyokadiriwa (II/2) | 6 kV |
| Sehemu ya msalaba ya kondakta AWG | 20 ... 4 |
| Volti ya kuongezeka iliyokadiriwa (III/2) | 8 kV |
| Volti ya kuongezeka iliyokadiriwa (III/3) | 8 kV |
| Sehemu ngumu ya kondakta | 0.75 mm² ... 16 mm² (Conductor connection with open terminal point) |
| Halijoto ya kawaida (mkusanyiko) | -5 °C ... 100 °C |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Volti ya insulation iliyokadiriwa (II/2) | 1000 V |
| Sehemu ya msalaba ya kondakta inayonyumbulika | 0.75 mm² ... 16 mm² |
| Volti ya insulation iliyokadiriwa (III/2) | 1000 V |
| Volti ya insulation iliyokadiriwa (III/3) | 1000 V |
| umbali wa chini kabisa wa kuteleza (II/2) | 5.5 mm |
| Jaribio la kupanda kwa joto linalohitajika | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| umbali wa chini kabisa (III/2) | 8 mm |
| umbali wa chini kabisa (III/3) | 12.5 mm |
| Unyevu wa jamaa (uhifadhi/usafiri) | 30 % ... 70 % |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 70 °C |
| Faharasa ya ufuatiliaji linganishi (IEC 60112) | CTI 600 |
| Eneo la kusugulia uso wa chuma (safu ya juu) | Tin (10 - 16 µm Sn) |
| Sehemu ya mwisho ya uso wa chuma (safu ya juu) | Tin (10 - 16 µm Sn) |
| Upinzani wa insulation, nafasi za jirani | > 5 MΩ |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (II/2) | 5.5 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/2) | 8 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/3) | 8 mm |
| Kielelezo cha kuwaka kwa waya wa mwanga GWFI kulingana na EN 60695-2-12 | 850 |
| Joto la kuwasha la waya yenye mwanga GWIT kulingana na EN 60695-2-13 | 775 |
| Halijoto kwa ajili ya jaribio la shinikizo la mpira kulingana na EN 60695-10-2 | 125 °C |
| Sehemu ya msalaba ya kondakta, inayonyumbulika, yenye kipete, na kifuniko cha plastiki | 0.75 mm² ... 10 mm² |
| Sehemu ya msalaba ya kondakta inayonyumbulika, yenye kipete bila kifuniko cha plastiki | 0.75 mm² ... 16 mm² |
| Sehemu mtambuka ya kondakta/aina ya kondakta/sehemu ya nguvu ya mvuto/thamani halisi | 0.75 mm² / solid / > 30 N |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika, vyenye kipete TWIN chenye kifuniko cha plastiki | 0.75 mm² ... 4 mm² |
Maelezo ya Bidhaa
Terminal for printed circuit board, nominal current: 76 A, nominal voltage (III/2): 1000 V, nominal section: 16 mm², number of potentials: 1, number of rows: 1, number of poles per row: 1, family of a
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
