


| Kipengele | Thamani |
|---|---|
| Ue | |
| DC | Resistive load (DC-12) |
| Yaani | AC |
| B10D | 2,000,000(ISO 13849-1 Annex C Table C.1) |
| Bidhaa | Safety door switch with key |
| Kebo | UL style 2464, No.22 AWG 12-core |
| Uzito | Approx. 700 g |
| Nyenzo | Enclosure : PA66 |
| Ulinzi | IP 65 (IEC 60529) |
| Nambari ya Sehemu | SG-B2-K2CD-L5 |
| Urefu wa kebo | 5m16.404 ft |
| Jina la bidhaa | Safety door switch with key SG-B2 |
| Nambari ya Bidhaa | SG-B2-K2CD-L5 |
| Nguvu ya kuingiliana | 1,400 N min. (GS-ET-19)(Note)(500 N min. : SG-K24 actuator)(Note): The actuator locking strength is rated at 1,400 N of static load. Do not apply a load higher than the rated value. When a higher load is expected to work on the actuator, provide an additional system consisting of another safety switch without lock (such as the SG-A1 safety switch) or a sensor to detect door opening and stop the machine. |
| Upinzani wa mshtuko | Malfunction : 100 m/s2, Destruction : 1,000 m/s2 |
| Upinzani wa mguso | 700 mΩ max. (initial value, 5 m16.404 ftcable) |
| Mpangilio wa mawasiliano | |
| Masafa ya uendeshaji | 900 operations/hour |
| Viwango vinavyotumika | EN 1088, IEC 60947-5-1, EN 60947-5-1,GS-ET-19, UL 508, CSA C22.2 No.14 |
| Nguvu ya kufungua moja kwa moja | 80 N min. |
| Nafasi ya kuondoa ufunguo | C(removable in LOCK position) |
| Upinzani wa mtetemo | Malfunction : 10 to 55 Hz, half amplitude 0.35 mm0.014 inDestruction : 30 Hz, half amplitude 1.5 mm0.059 in |
| Maelekezo yanayotumika | Machinery directive (2006/42/EC)Low voltage directive (2006/95/EC) |
| Usafiri wa moja kwa moja wa ufunguzi | 11 mm0.433 inmin. (actuator : SG-K21)12 mm0.472 inmin. (for other actuators) |
| Uimara wa umeme | 100,000 operations min. (AC-12, 250 V 1 A)1,000,000 operations min. (AC/DC 24 V 100 mA)(900 operations/hour) |
| Uimara wa mitambo | 1,000,000 operations min. (GS-ET-19)Rear unlocking button : 3,000 operations min. (Type SG-B2-□-L5) |
| Mkondo wa joto (Ith) | ・2.5 A・Ambient temperature :-25 to +60 ℃-13 to +140 ℉: 2.5 A max.+60 to +65 ℃+140 to +149 ℉: 1.5 A max.+65 to +70 ℃+149 to +158 ℉: 1.0 A max. |
| Mzigo wa kushawishi (AC-15) | - |
| Mzigo wa kushawishi (DC-13) | 2.3A |
| Kasi ya uendeshaji wa kichocheo | 0.05 to 1.0 m/sec. |
| Ufunguo: Nguvu ya kufungua moja kwa moja | 0.6 N・m min. |
| Ufunguo: Nguvu ya mvutano wa ufunguo | 1.0 N・m min. |
| Ufunguo: Shahada ya ufunguzi wa moja kwa moja | 60°min. |
| Ufunguo: Uimara wa mitambo | 100,000 operations min. |
| Volti ya insulation iliyokadiriwa (Ui) | 250 V(Note): Ratings approved by UL, c-UL : 125 V |
| Ufunguo: Uimara wa uendeshaji wa ufunguo | 10,000 operations min. |
| Ufunguo: Vipimo vya uendeshaji | 2 positions |
| Hali ya uendeshaji: Urefu | 2,000 m6,561.68 ftmax. |
| Darasa la ulinzi wa mshtuko wa umeme | Class II (IEC 61140)(Note), 回(double-insulated)(Note): Basic insulation of 2.5 kV impulse withstand voltage is ensured between different contact circuits.When both SELV (safety extra low voltage) or PELV (protective extra low voltage) circuits and other circuits (such as 230 V AC circuits) are used for the solenoid power and contact circuits at the same time, the SELV or PELV requirements are not met any more. |
| Kifaa cha kinga cha mzunguko mfupi | Use 250 V / 10 A fast acting type fuse |
| Volti inayostahimili msukumo (Uimp) | 2.5 kV |
| Mkondo wa mzunguko mfupi wa masharti | 50 A (250 V) |
| Hali ya uendeshaji: Unyevu wa mazingira | 45 to 85 % RH |
| Hali ya uendeshaji: Kiwango cha uchafuzi | 3 (Inside 2) |
| Viwango vinavyotumika: Viwango vya matumizi | IEC 60204-1, EN 60204-1 |
| Hali ya uendeshaji: Halijoto ya kawaida | -25 to +70 ℃-13 to +158 ℉(No dew condensation or icing allowed)Storage : -40 to +80 ℃-40 to +176 ℉ |
| Volti ya uendeshaji iliyokadiriwa (Ue) / Mkondo wa uendeshaji uliokadiriwa (Yaani) | Ue30V125V250VIeACResistive load (AC-12)-2.5A1.5AInductive load (AC-15)-1.5A0.75ADCResistive load (DC-12)2.5A1.1A0.55AInductive load (DC-13)2.3A0.55A0.27A |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji