![SF4D-H80-01 - SF4D-H80-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D](http://www.baigongbaohao.com/pic/684/844/sf4d-h80-01.jpg)
Kipatikana Bidhaa Maarufu
SF4D-H80-01
SF4D-H80-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
$0.00USD
4436 kwenye hisa
Vipimo Muhimu
Bidhaa:Safety Light Curtain [Type 4 PLe SIL3]
PFHD:3.69×10-9
MTTFD:318 years or more
Tamko:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
Taarifa za Msambazaji
PANASONIC
Bidhaa: 4316
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Bidhaa | Safety Light Curtain [Type 4 PLe SIL3] |
| PFHD | 3.69×10-9 |
| MTTFD | 318 years or more |
| Tamko | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| Maelezo | Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Nyenzo | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| Vifaa | SF4B-TR25 (test rod) : 1 pc. |
| Nambari ya Sehemu | SF4D-H80-01 |
| Jina la bidhaa | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| Hali ya usalama | Control output (OSSD 1 / 2) OFF state |
| Volti ya nguvu | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Nambari ya Bidhaa | SF4D-H80-01 |
| Aina ya mfumo mdogo | Type B (IEC 61508-2) |
| Upanuzi wa kebo | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| Kitendakazi cha kuzima sauti | Incorporated (12-core cable) |
| Aina ya uendeshaji | Short mode : 0.2 to 9 m0.656 to 29.528 ftLong mode : 0.8 to 15 m2.625 to 49.213 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| Unyevu wa mazingira | 30 to 85 % RH, Storage : 30 to 95 % RH |
| Kipengee kinachotoa | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Upinzani wa mshtuko | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| Mbinu ya kuunganisha | By connector |
| Batilisha chaguo la kazi | Incorporated (12-core cable) |
| Urefu wa kinga | 1,590 mm62.598 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| Kipengele cha kuingiliana | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| Urefu wa uendeshaji | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Vitendaji vya hiari | Optional functions cannot be used when SF4D-□-01 is used. |
| Mwangaza wa mazingira | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| Halijoto ya mazingira | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| Matumizi ya sasa | Emitter : 120 mA or lessReceiver : 150 mA or less |
| Kitu cha chini cha kuhisi | ø25 mmø0.984 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| Kipengele cha kuokoa nguvu | Incorporated |
| Kitendakazi cha kuingiza data cha jaribio | Incorporated |
| Idadi ya njia za boriti | 80 |
| Upinzani wa mtetemo | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| Muda wa majibu ya kushindwa | Within response time (OFF response) |
| Upinzani wa insulation | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| Mbinu ya ulandanishi | Line synchronization / optical synchronization (selectable by DIP switch) |
| Pembe ya uwazi yenye ufanisi | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| Kipengele cha kutolewa kwa kufunga nje | Incorporated |
| T1 (kipindi cha majaribio ya uthibitisho) | 20 years |
| Viwango vinavyotumika: Japani | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) |
| SFF (Sehemu ya Kushindwa Salama) | 99% |
| Kitendakazi cha kiashiria cha matumizi | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT (Uvumilivu wa Hitilafu ya Vifaa) | 1 |
| Viwango vinavyotumika: China (GB) | GB/T 4584 |
| Utii wa maagizo ya kuashiria CE | Machinery Directive, EMC Directive, RoHS Directive |
| Viwango vinavyotumika: Ulaya (EU) | EN 61496-1/2 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN 50178 |
| Matokeo ya udhibiti (OSSD 1, OSSD 2) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| Kazi ya kuzuia kuingiliwa | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Viwango vinavyotumika: Amerika Kaskazini | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| Kipengele cha ufuatiliaji wa kifaa cha nje | Incorporated (8-core cable or 12-core cable) |
| Uzito (Jumla ya mtoaji na mpokeaji) | 4,000g approx. |
| Pato la msaidizi (AUX)(Pato lisilo la usalama) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| Viwango vinavyotumika: Kiwango cha kimataifa | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| Udhibiti wa matokeo (OSSD 1, OSSD 2):Muda wa majibu | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| Upinzani wa mazingira: Kiwango cha ulinzi | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| Matokeo ya udhibiti (OSSD 1, OSSD 2): Hali ya uendeshaji | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Matokeo ya udhibiti (OSSD1, OSSD2): Mzunguko wa ulinzi | Incorporated |
| Upinzani wa mazingira: Volti ya nguvu ya dielectric | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| Pato la msaidizi (AUX)(Pato lisilo la usalama): Muda wa majibu | OFF response : 60 ms or less, ON response : 60 ms or less |
| Pato la msaidizi (AUX)(Pato lisilo la usalama): Hali ya uendeshaji | Control output ON : OFF, Control output OFF : ON(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| Pato la msaidizi (AUX)(Pato lisilo la usalama): Mzunguko wa ulinzi | Incorporated |
| Urefu wa kinga: Unapotumia kama vifaa vya usalama kwa mashine ya vyombo vya habari vya Kichina au unapotumia kwa mashine ya vyombo vya habari vya Kijapani au mashine ya kukata karatasi | 1,580 mm62.205 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
Maelezo ya Bidhaa
More details
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
