Kipatikana Bidhaa Maarufu
SACC-M12MR-5CON-PG 9-SH ADH
SACC-M12MR-5CON-PG 9-SH ADH 1411893 PHOENIX CONTACT Connector, 5-pos., shielded, angled M12 plug, A-coded, s..
$0.00USD
4193 kwenye hisa
Vipimo Muhimu
GTIN:4046356944632
Ufunguo wa kuagiza:1411893
(Michoro):
Kitengo cha kufungasha:1
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4046356944632 |
| Ufunguo wa kuagiza | 1411893 |
| (Michoro) | |
| Kitengo cha kufungasha | 1 |
| (Vipimo) | The connector pin assignment can be rotated 90° to the cable outlet |
| ETIM 4.0 (eCl@ss) | EC002635 |
| ETIM 5.0 (eCl@ss) | EC002635 |
| ETIM 6.0 (eCl@ss) | EC002061 |
| Note (Dimensions) | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| UNSPSC 13.2 (ETIM) | 39121413 |
| UNSPSC 18.0 (ETIM) | 39121413 |
| UNSPSC 19.0 (ETIM) | 39121413 |
| UNSPSC 20.0 (ETIM) | 39121413 |
| UNSPSC 21.0 (ETIM) | 39121413 |
| Usimbaji (Vipimo) | A - standard |
| Torque (Dimensions) | 0.4 Nm (M12 knurl) |
| Nambari ya ushuru maalum | 85366990 |
| Nyenzo za mawasiliano (Jumla) | CuZn |
| Nyenzo, knurls (Jumla) | Zinc die-cast, nickel-plated |
| Volti iliyokadiriwa (Vipimo) | 60 V DC |
| Nyenzo ya kuziba (Jumla) | NBR |
| Onyesho la hali (Vipimo) | No |
| (Viwango na Kanuni) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| eCl@ss 4.0 (Uainishaji) | 27260700 |
| eCl@ss 4.1 (Uainishaji) | 27260700 |
| eCl@ss 5.0 (Uainishaji) | 27260700 |
| eCl@ss 5.1 (Uainishaji) | 27260700 |
| eCl@ss 6.0 (Uainishaji) | 27260700 |
| eCl@ss 7.0 (Uainishaji) | 27440102 |
| eCl@ss 8.0 (Uainishaji) | 27440102 |
| eCl@ss 9.0 (Uainishaji) | 27440102 |
| Mchoro wa utendaji kazi (Michoro) | |
| Mbinu ya muunganisho (Vipimo) | Screw connection |
| Tightening torque (Dimensions) | Screw plug insert with sleeve housing as far it will go |
| Nyenzo ya mwili wa mshiko (Jumla) | Zinc die-cast, nickel-plated |
| eCl@ss 10.0.1 (Uainishaji) | 27440102 |
| Kiwango cha uchafuzi (Vipimo) | 3 |
| Idadi ya nafasi (Vipimo) | 5 |
| Viwango/vipimo (Kebo) | M12 connector IEC 61076-2-101 |
| Kategoria ya volteji kupita kiasi (Vipimo) | II |
| Assembly instructions (Dimensions) | The wires can be connected both with ferrules and without ferrules |
| Nyenzo za mtoa huduma za mawasiliano (Jumla) | PA |
| Nyenzo ya uso wa mguso (Jumla) | Au |
| External cable diameter (Drawings) | 6 mm ... 8 mm |
| Upinzani wa insulation (Vipimo) | ≥ 100 MΩ |
| Viwango/kanuni (Vipimo) | M12 connector IEC 61076-2-101 |
| Mkondo uliokadiriwa kwa 40°C (Vipimo) | 4 A |
| Viwango/vipimo (Nyenzo) | M12 connector IEC 61076-2-101 |
| Sehemu ya msalaba ya kondakta (Vipimo) | 0.25 mm² ... 0.75 mm² |
| RoHS ya China (Viwango na Kanuni) | Environmentally Friendly Use Period = 50 |
| Conductor cross section AWG (Dimensions) | 24 ... 18 |
| Muunganisho katika ac. na kebo ya kawaida (Kebo) | CUL |
| Mizunguko ya kuingiza/kutoa (Vipimo) | ≥ 50 |
| Stripping length of the sheath (Drawings) | 40 mm |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Kebo) | HB |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Jumla) | HB |
| Stripping length of the individual wire (Drawings) | 5 mm |
| Schematic diagramPin assignment M12 male connector, 5-pos., A-coded, male side (Drawings) |
Maelezo ya Bidhaa
Plug-in connector, 5-pole, shielded, angled connector M12, A-coated, screw connection with studs, knurled material: brass, nickel-plated, Pg9 cable gland, cable outer diameter 6 mm ... 8 mm
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
Functional drawing
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
