Kipatikana Bidhaa Maarufu
SACC-M 8FS-3PCON CX
SACC-M 8FS-3PCON CX 1404601 PHOENIX CONTACT Sensor/actuator connector, female, straight, 3-pos., M8, Piercec..
$0.00USD
4637 kwenye hisa
Vipimo Muhimu
GTIN:4046356703260
Ufunguo wa kuagiza:1404601
(Michoro):
Kitengo cha kufungasha:1
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4046356703260 |
| Ufunguo wa kuagiza | 1404601 |
| (Michoro) | |
| Kitengo cha kufungasha | 1 |
| UNSPSC 11 (ETIM) | 31251501 |
| ETIM 3.0 (eCl@ss) | EC002062 |
| ETIM 4.0 (eCl@ss) | EC002062 |
| ETIM 5.0 (eCl@ss) | EC002062 |
| ETIM 6.0 (eCl@ss) | EC002062 |
| UNSPSC 13.2 (ETIM) | 31251501 |
| UNSPSC 18.0 (ETIM) | 39121413 |
| UNSPSC 19.0 (ETIM) | 39121413 |
| UNSPSC 20.0 (ETIM) | 39121413 |
| UNSPSC 21.0 (ETIM) | 39121413 |
| UNSPSC 6.01 (ETIM) | 31251501 |
| UNSPSC 12.01 (ETIM) | 31251501 |
| Nambari ya ushuru maalum | 85366990 |
| UNSPSC 7.0901 (ETIM) | 31251501 |
| (Hali ya mazingira) | 0.2 Nm (M8 knurl) |
| Kumbuka (Hali ya mazingira) | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| Nyenzo za mawasiliano (Jumla) | CuZn |
| Nyenzo, knurls (Jumla) | Nickel-plated brass |
| Nyenzo ya kuziba (Jumla) | NBR |
| Usimbaji (Hali za mazingira) | A - standard |
| Torque (Hali ya mazingira) | 0.5 Nm (Pressure nut with coupling sleeve) |
| (Viwango na Kanuni) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| eCl@ss 4.0 (Uainishaji) | 27140800 |
| eCl@ss 4.1 (Uainishaji) | 27140800 |
| eCl@ss 5.0 (Uainishaji) | 27143400 |
| eCl@ss 5.1 (Uainishaji) | 27143400 |
| eCl@ss 6.0 (Uainishaji) | 27279200 |
| eCl@ss 7.0 (Uainishaji) | 27440104 |
| eCl@ss 8.0 (Uainishaji) | 27440104 |
| eCl@ss 9.0 (Uainishaji) | 27440102 |
| Nyenzo ya mwili wa mshiko (Jumla) | PA 6.6 |
| eCl@ss 10.0.1 (Uainishaji) | 27440102 |
| Viwango/vipimo (Kebo) | M8 connector IEC 61076-2-104 |
| Kiwango cha ulinzi (Vipimo) | IP68 |
| Nyenzo za mtoa huduma za mawasiliano (Jumla) | PA 6.6 |
| Nyenzo ya uso wa mguso (Jumla) | Ni/Au |
| External cable diameter (Drawings) | 3 mm ... 5 mm |
| Volti iliyokadiriwa (Hali ya mazingira) | 60 V |
| Viwango/vipimo (Nyenzo) | M8 connector IEC 61076-2-104 |
| Onyesho la hali (Hali ya mazingira) | No |
| RoHS ya China (Viwango na Kanuni) | Environmentally Friendly Use Period = 50 |
| Mbinu ya muunganisho (Hali za mazingira) | Piercecon®fast connection |
| REACh SVHC (Viwango na Kanuni) | |
| Kiwango cha uchafuzi wa mazingira (Hali ya mazingira) | 3 |
| Idadi ya nafasi (Hali ya mazingira) | 3 |
| Kategoria ya volteji kupita kiasi (Hali za mazingira) | II |
| Stripping length of the sheath (Drawings) | 35 mm |
| Upinzani wa insulation (Hali ya mazingira) | ≥ 100 MΩ |
| Viwango/kanuni (Mazingira ya Mazingira) | M8 connector IEC 61076-2-104 |
| Mkondo uliokadiriwa kwa 40°C (Hali ya mazingira) | 4 A |
| Halijoto ya mazingira (uendeshaji) (Vipimo) | -25 °C ... 85 °C (Plug / socket) |
| Sehemu ya msalaba ya kondakta (Hali ya mazingira) | 0.14 mm² ... 0.38 mm² |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Kebo) | V0 |
| Sehemu ya msalaba ya kondakta AWG (Hali za mazingira) | 22 ... 26 |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Jumla) | V0 |
| Mizunguko ya kuingiza/kutoa (Hali za mazingira) | ≥ 100 |
| Kipenyo cha waya ikijumuisha insulation (Hali ya mazingira) | 1 mm ... 1.3 mm (Black wire clamping for 0.14 mm² ... 0.25 mm²) |
| Functional drawinga = cut flushb = codingWhen assembled, the coding marks must line up. (Drawings) |
Maelezo ya Bidhaa
Connector for sensors/actuators, female, straight, 3-pole, M8, Piercecon®, knurled metal, cable diameter max. 5 mm
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
Functional drawinga = cut flushb = codingWhen assembled, the coding marks must line up.
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
