Kipatikana Bidhaa Maarufu
RT 5
RT 5 3049026 PHOENIX CONTACT Bolt connection terminal block
$4.10USD
2474 kwenye hisa
Vipimo Muhimu
:Machine building
Dokezo:The rated insulation voltage applies to insulated cable lugs acc. to DIN 46237:1970-07 with or without path extension and for uninsulated cable lugs acc. to DIN 46234:1980-03 with path extension.
Rangi:gray (RAL 7042)
Upana:10 mm
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Machine building | |
| Dokezo | The rated insulation voltage applies to insulated cable lugs acc. to DIN 46237:1970-07 with or without path extension and for uninsulated cable lugs acc. to DIN 46234:1980-03 with path extension. |
| Rangi | gray (RAL 7042) |
| Upana | 10 mm |
| Urefu | 66 mm |
| Matokeo | Test passed |
| matokeo | (Permanent) |
| Jumla | Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories). |
| Spektramu | Service life test category 1, class B, body mounted |
| Kiwango cha ASD | 1.857 (m/s²)²/Hz |
| Masafa | f1= 5 Hz to f2= 150 Hz |
| Uwezo | 1 |
| Data ya daraja | 41 A / 6 mm² |
| Umbo la mapigo | Half-sine |
| Kuongeza kasi | 0.8g |
| Aina ya bidhaa | Bolt connection terminal block |
| Uzi wa skrubu | M5 |
| Masafa ya torque | 2.5 Nm ... 3 Nm |
| Kipenyo cha boliti | 5 mm |
| Sehemu ya msalaba | 0.5 mm² ... 6 mm² |
| Kipenyo cha shimo | 5.3 mm |
| Aina ya kupachika | NS 35/7,5 |
| Imekadiriwa mkondo | 41 A |
| Volti iliyokadiriwa | 550 V |
| Vipimo | DIN EN 50155 (VDE 0115-200):2008-03 |
| Utambulisho | II 2 G Ex eb IIC Gb |
| Idadi ya safu mlalo | 1 |
| Familia ya bidhaa | RT |
| Muda wa mshtuko | 30 ms |
| Upana wa kifuniko cha mwisho | 2.2 mm |
| Orodha ya madaraja | Plug-in bridge / FBS 2-8 / 3030284 |
| Mkondo wa nominella | 41 A |
| Volti ya kawaida | 1000 V |
| Fungua paneli ya pembeni | Yes |
| Maelekezo ya majaribio | X-, Y- and Z-axis |
| Marekebisho ya makala | 09 |
| Urefu wa kukatwa | The stripping length depends on the specification provided by the cable lug manufacturer. |
| Muda wa kuambukizwa | 30 s |
| Kukaza torque | 2.5 ... 3 Nm |
| Upinzani wa mguso | 0.41 mΩ |
| Kina cha NS 35/15 | 58.5 mm |
| Eneo la matumizi | Railway industry |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Kina kwenye NS 35/7,5 | 51 mm |
| Nyenzo za kuhami joto | PA |
| Volti ya kuongezeka iliyokadiriwa | 8 kV |
| Kiwango cha juu cha mzigo wa sasa | 41 A (with 6 mm² conductor cross section) |
| Kategoria ya volteji nyingi | III |
| Sehemu ya msalaba ya nominella | 6 mm² |
| Idadi ya miunganisho | 2 |
| Mpangilio wa volteji ya jaribio | 9.8 kV |
| Muda wa jaribio kwa kila mhimili | 5 h |
| Uwezo wa muunganisho AWG | 26 ... 10 |
| AWG ya sehemu mtambuka | 20 ... 10 (converted acc. to IEC) |
| Usaidizi wa reli/urekebishaji wa DIN | NS 35 |
| Ex ongezeko la joto | 40 K (41 A at 6 mm²) |
| Imekadiriwa sehemu nzima ya AWG | 10 |
| Vifaa vilivyothibitishwa zamani | 3049097 D-RT 3/5 |
| Volti ya insulation iliyokadiriwa | 500 V |
| kwa ajili ya kuunganisha daraja | 550 V |
| Uwezo wa muunganisho ni mgumu | 0.1 mm² ... 6 mm² |
| Kikundi cha nyenzo za kuhami joto | I |
| Kiwango cha halijoto ya uendeshaji | -60 °C ... 110 °C |
| Uwezo wa muunganisho unaonyumbulika | 0.1 mm² ... 6 mm² |
| Halijoto ya kawaida (mkusanyiko) | -5 °C ... 70 °C |
| Idadi ya mishtuko kwa kila mwelekeo | 3 |
| Halijoto ya kawaida (utendaji) | -5 °C ... 70 °C |
| Halijoto ya mazingira (uendeshaji) | -60 °C ... 110 °C (Operating temperature range incl. self-heating; for max. short-term operating temperature, see RTI Elec.) |
| Idadi ya miunganisho kwa kila ngazi | 2 |
| Muunganisho katika acc. na kiwango cha kawaida | IEC 60947-7-1 |
| Unyevu unaoruhusiwa (uendeshaji) | 20 % ... 90 % |
| Jaribio la kupanda kwa joto linalohitajika | Increase in temperature ≤ 45 K |
| Mkondo wa kuhimili kwa muda mfupi 6 mm² | 0.72 kA |
| - Kwa urefu uliokatwa, funika kwa kifuniko | 220 V |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Sumu ya gesi ya moshi NFPA 130 (SMP 800C) | passed |
| Halijoto ya kawaida (uhifadhi/usafiri) | -25 °C ... 60 °C (for a short time, no longer than 24 h, -60°C to +70°C) |
| Unyevu unaoruhusiwa (uhifadhi/usafiri) | 30 % ... 70 % |
| NFPA 130 inayoweza kuwaka juu ya uso (ASTM E 162) | passed |
| Rangi ya utambulisho wa vifuniko vya kebo ya pete: nyekundu | 1 mm² |
| Rangi ya utambulisho wa vifuniko vya kebo ya pete: bluu | 2.5 mm² |
| Matumizi ya nyenzo za kuhami tuli katika baridi | -60 °C |
| Usambazaji wa nguvu wa kiwango cha juu kwa hali ya kawaida | 1.31 W |
| - Kwa urefu uliokatwa na sahani ya kugawanya | 550 V |
| Kiwango cha joto cha Kalorimetriki NFPA 130 (ASTM E 1354) | 27,5 MJ/kg |
| Rangi ya utambulisho wa vifuniko vya kebo ya pete: njano | 6 mm² |
| - Katika kuunganisha kati ya vitalu vya mwisho visivyo karibu | 220 V |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Msongamano maalum wa macho wa moshi NFPA 130 (ASTM E 662) | passed |
| Kiashiria cha halijoto ya nyenzo za kuhami joto (Elec., UL 746 B) | 130 °C |
| Kiashiria cha halijoto cha nyenzo za kuhami joto (DIN EN 60216-1 (VDE 0304-21)) | 125 °C |
Maelezo ya Bidhaa
Stud connection terminal, nominal voltage: 1000 V, nominal current: 41 A, number of connections: 2, connection type: Stud connection, Dimensioning section: 6 mm², mounting class: NS 35/7.5, NS 35/15,
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
