Muda wa huduma: Jumatatu hadi Ijumaa 9:00-18:00
PWM-40-36 - PWM-40-36 MEANWELL AC-DC Single output LED driver Constant Voltage (CV), PWM output for LED strips, Output 3..
Kipatikana Bidhaa Maarufu

PWM-40-36

PWM-40-36 MEANWELL AC-DC Single output LED driver Constant Voltage (CV), PWM output for LED strips, Output 3..

$0.00USD
4546 kwenye hisa
Vipimo Muhimu
Jina:PWM-40-36
Jimbo:Recommended Model
Muundo:Box
Mfululizo:PWM-40
Taarifa za Msambazaji
MEANWELL
MEANWELL
Bidhaa: 6448
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi

Speci ya Kiufundi

KipengeleThamani
JinaPWM-40-36
JimboRecommended Model
MuundoBox
MfululizoPWM-40
Kufifia0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V
IdhiniCCC, CE, ENEC, UL
Nguvu (W)40,32
Fomu ndogoIP67
Upana (mm)53.00
Urefu (mm)35.00
Kiwango cha juu cha kuingiza AC305,00
Kiwango cha chini cha kuingiza AC90,00
MaombiLighting
MtengenezajiMEAN WELL
Aina ya bidhaaLED Driver
Kutengwa (V)3.750,00
Volti ya kutoa36,00
Nguvu ya Kilele (W)40.32
Kiunganishi cha kuingiza dataCable
Masafa ya kuingiza50 Hz, 60 Hz
Muda Mrefu/Usuli150.00
Maelezo MarefuLED driver dimmable.Specially designed for the regulation of LED strips.Format in box waterproof plasticIP67.Input range90-305Vca47-63HzOutput voltage36Vcc.Output intensity1120mA. Range of output current 0-1120mA according to demand load.Power:40,3 W.Efficiency typical:90%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):150 x 53 x 35mm.5 years of warranty.Manufacturer: MEAN WELL.The series PWM are LED Drivers designed to work directly with LED strips. Must be equipment that is fed at constant voltage. With plastic housing designed for lighting applications in indoor, decorative or architectural. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.The output pulse can be regular any LED strip by small, is always to not overcome the maximum load of the driver.To be the driver and the regulator are integrated on the same computer we remove any kind of incompatibility and reduce the cost, size. Design of high frequency avoids any problem of noise audible to any level of regulation.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
Kiunganishi cha kutoaCable
Aina ya Kiingilio CASingle-phase
Dhamana (Miaka)5,00
Nchi ya AsiliChina

Maelezo ya Bidhaa

More details
Vipengele Muhimu
  • Ubora wa kiwango cha viwanda
  • Inaendana na RoHS
  • Imethibitishwa CE
  • Dhamana ya mwaka 1

Maelezo ya Kiufundi

LED driver dimmable.

Nyaraka za Bidhaa

Jalada la data

Speci za kiufundi na data ya utendaji

Mwongozo wa Mtumiaji

Mwongozo wa usakinishaji na uendeshaji

Top