Kipatikana Bidhaa Maarufu
PTFIX 2X2,5 TQ
PTFIX 2X2,5 TQ 1082539 PHOENIX CONTACT Block for distribution, Terminal base, nominal voltage: 500 V, nomina..
$0.00USD
3249 kwenye hisa
Vipimo Muhimu
:Depending on the application and mechanical load, other arrangements for the mounting accessories can be chosen.
Kina:21.2 mm
Upana:5.2 mm
Rangi:pastel turquoise (RAL 6034)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Depending on the application and mechanical load, other arrangements for the mounting accessories can be chosen. | |
| Kina | 21.2 mm |
| Upana | 5.2 mm |
| Rangi | pastel turquoise (RAL 6034) |
| Urefu | 28.2 mm |
| Matokeo | Approved Test |
| Spektramu | Category 2 durability test, on the bogie |
| Kiwango cha ASD | 6.12 (m/s²)²/Hz |
| Uwezekano | 1 |
| Mizunguko | 135 |
| masafa | f1= 5 Hz to f2= 250 Hz |
| Kipimo cha Kiume | A3 |
| Aina ya Mshtuko | Semi-sinusoid |
| Uchunguzi | The maximum charging current of the various terminal points must not be exceeded. |
| Urefu wa Maganda | 8 mm ... 10 mm |
| Kuongeza kasi | 3.12g |
| Aina ya Bidhaa | Distribution terminal |
| Upande ulio wazi | No |
| Mapitio ya Makala | 02 |
| Idadi ya safu mlalo | 1 |
| Kasi ya mzunguko | 10 r.p.m. |
| Jamii ya Kuongezeka | Iii |
| Sehemu ya Majina | 2.5 mm² |
| Mkondo wa nominella | 24 A |
| Volti ya kawaida | 450 V |
| Maelekezo ya Mtihani | X, Y, and Z axes |
| Muda wa Utendaji | 30 sec |
| Aina ya ufungaji | Interlock in rail adapter |
| Sehemu ya Ukubwa wa AWG | 14 |
| Mizunguko ya Joto | 192 |
| Vipimo vya Mtihani | DIN EN 50155 (VDE 0115-200):2008-03 |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Nyenzo za kuhami joto | PA |
| Sehemu ya Reli/Uso wa Kurekebisha | NS 35 |
| Sehemu ya Kondakta wa AWG | 26 ... 12 (Converted according to IEC) |
| Muda wa ajali | 18 ms |
| Idadi ya miunganisho | 2 |
| Muda wa jaribio kwa kila mhimili | 5 h |
| Sehemu ngumu ya kondakta | 0.14 mm² ... 4 mm² |
| Sehemu/Uzito wa Kondakta | 0.14 mm2/0.2 kg |
| Mahitaji ya jaribio la kupasha joto | Temperature rise ≤ 45 K |
| Kiwango cha Juu cha Kuchaji | 27 A |
| Nominal Value Test Force | 1 N |
| Sehemu ya Waya Imara [AWG] | 24 ... 12 (Converted according to IEC) |
| Kikundi cha nyenzo za kuhami joto | I |
| Sehemu ya kondakta inayonyumbulika | 0.14 mm² ... 2.5 mm² |
| Thamani ya Majina ya Voltage ya Jaribio | 9.8 kV |
| Halijoto ya Mazingira (Endesha) | -5 °C ... 70 °C |
| Sehemu ya Waya Inayonyumbulika [AWG] | 26 ... 14 (Converted according to IEC) |
| Halijoto ya Mazingira (Huduma) | -60 °C ... 110 °C (Operating temperature range incl. self-heating, max. short-term operating temperature; see RTI Elec.) |
| Muunganisho unaozingatia viwango | IEC 60998-2-2 |
| Halijoto ya Mazingira (Kuweka) | -5 °C ... 70 °C |
| Volti ya Muda ya Vipimo | 6 kV |
| Idadi ya miunganisho kwa kila ghorofa | 2 |
| Idadi ya migongano kwa kila usukani | 3 |
| Unyevu unaoruhusiwa wa hewa (huduma) | 20 % ... 90 % |
| Darasa la kuwaka kulingana na UL 94 | V0 |
| Sumu ya Gesi ya Flue ya NFPA 130 (SMP 800C) | approved |
| Permissible short-term current 4 mm² | 0.48 kA |
| Matumizi tuli ya nyenzo baridi za kuhami joto | -60 °C |
| Halijoto ya Mazingira (Uhifadhi/Usafiri) | -25°C ... 60 °C (For a short time, no more than 24 hours, from -60 °C to +70 °C) |
| Mkondo unaoruhusiwa wa muda mfupi 2.5 mm² | 0.3 kA |
| Unyevu unaoruhusiwa wa hewa (uhifadhi/usafiri) | 30 % ... 70 % |
| Uwezo wa kuwaka wa Nyuso za NFPA 130 (ASTM E 162) | approved |
| Nguvu ya Juu Iliyosafishwa na Hali ya Majina | 0.77 W |
| Heat Emission Calorimeter NFPA 130 (ASTM E 1354) | 28 MJ/kg |
| Sehemu ya kebo inayonyumbulika (kifuniko cha vidole vya miguu chenye mkono wa plastiki) | 0.14 mm² ... 2.5 mm² |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Sehemu ya kebo inayonyumbulika (kifuniko cha vidole bila mkono wa plastiki) | 0.14 mm² ... 2.5 mm² |
| Uzito wa Gesi ya Flue ya Optiki ya NFPA 130 (ASTM E 662) | approved |
| Kielelezo cha Joto la Nyenzo za Kuhami Uhusiano (Elec., UL 746 B) | 130 °C |
| Kiashiria cha halijoto cha nyenzo za kuhami joto (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
Maelezo ya Bidhaa
Distribution block, Base terminal, nominal voltage: 450 V, nominal current: 24 A, number of connections: 2, connection type: Push-in connection, cross-section: 0.14 mm² - 4 mm², mounting class: interl
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
