Kipatikana Bidhaa Maarufu
PTFIX 10/12X4-G BU
PTFIX 10/12X4-G BU 3274012 PHOENIX CONTACT Distribution block, bridged internally, nom. voltage: 450 V, nomi..
$0.00USD
3968 kwenye hisa
Vipimo Muhimu
GTIN:4055626668475
Ufunguo wa kuagiza:3274012
(Michoro):
Ukurasa wa katalogi:Page 452 (C-1-2019)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4055626668475 |
| Ufunguo wa kuagiza | 3274012 |
| (Michoro) | |
| Ukurasa wa katalogi | Page 452 (C-1-2019) |
| Kitengo cha kufungasha | 1 pc |
| Upana (Jumla) | 46.3 mm |
| Rangi (Michoro) | blue |
| Urefu (Jumla) | 28.6 mm |
| UNSPSC 11 (ETIM) | 39121410 |
| Nchi ya asili | PL (Poland) |
| ETIM 3.0 (eCl@ss) | EC000897 |
| ETIM 4.0 (eCl@ss) | EC000897 |
| ETIM 5.0 (eCl@ss) | EC000897 |
| ETIM 6.0 (eCl@ss) | EC000897 |
| ETIM 7.0 (eCl@ss) | EC000897 |
| (Data ya muunganisho) | IEC 60998-2-2 |
| UNSPSC 13.2 (ETIM) | 39121410 |
| UNSPSC 18.0 (ETIM) | 39121410 |
| UNSPSC 19.0 (ETIM) | 39121410 |
| UNSPSC 20.0 (ETIM) | 39121410 |
| UNSPSC 21.0 (ETIM) | 39121410 |
| UNSPSC 6.01 (ETIM) | 30211811 |
| UNSPSC 12.01 (ETIM) | 39121410 |
| ASD level (Drawings) | 6.12 (m/s2)2/Hz |
| Nambari ya ushuru maalum | 85369010 |
| UNSPSC 7.0901 (ETIM) | 39121410 |
| Potentials (Drawings) | 1 |
| Shock form (Drawings) | Half-sine |
| Kiasi cha chini cha oda | 8 pc |
| Acceleration (Drawings) | 30g |
| Muunganisho (Vipimo) | Feed-in stage |
| Test spectrum (Drawings) | Service life test category 2, bogie-mounted |
| Shock duration (Drawings) | 18 ms |
| Test frequency (Drawings) | f1= 5 Hz to f2= 250 Hz |
| Open side panel (Drawings) | No |
| Test directions (Drawings) | X-, Y- and Z-axis (pos. and neg.) |
| Idadi ya viwango (Michoro) | 1 |
| (Viwango na Kanuni) | No hazardous substances above threshold values |
| Finger protection (Drawings) | guaranteed |
| Shock test result (Drawings) | Test passed |
| eCl@ss 4.0 (Uainishaji) | 27141121 |
| eCl@ss 4.1 (Uainishaji) | 27141121 |
| eCl@ss 5.0 (Uainishaji) | 27141120 |
| eCl@ss 5.1 (Uainishaji) | 27141120 |
| eCl@ss 6.0 (Uainishaji) | 27141100 |
| eCl@ss 7.0 (Uainishaji) | 27141120 |
| eCl@ss 8.0 (Uainishaji) | 27141120 |
| eCl@ss 9.0 (Uainishaji) | 27141120 |
| Nominal current IN (Drawings) | 57 A |
| Nominal voltage UN (Drawings) | 450 V |
| Urefu wa kukatwa (Vipimo) | 10 mm ... 12 mm |
| Mbinu ya muunganisho (Vipimo) | Push-in connection |
| Kiwango cha uchafuzi (Michoro) | 3 |
| Insulating material (Drawings) | PA |
| Rated surge voltage (Drawings) | 6 kV |
| Maximum load current (Drawings) | 57 A |
| Kategoria ya volteji kupita kiasi (Michoro) | III |
| Maximum total current (Drawings) | 63 A |
| Nominal cross section (Drawings) | 4 mm² |
| Idadi ya miunganisho (Michoro) | 13 |
| Result of thermal test (Drawings) | Test passed |
| Test duration per axis (Drawings) | 5 h |
| Insulating material group (Drawings) | I |
| Uzito kwa Kipande (bila kujumuisha upakiaji) | 37.500 g |
| Back of the hand protection (Drawings) | guaranteed |
| RoHS ya China (Viwango na Kanuni) | Environmentally friendly use period: unlimited = EFUP-e |
| Kipimo cha ndani cha silinda (Vipimo) | A3 |
| Nominal cross section feed-in (Drawings) | 10 mm² |
| NF F16-101, NF F10-102 Class F (Drawings) | 2 |
| NF F16-101, NF F10-102 Class I (Drawings) | 2 |
| Number of shocks per direction (Drawings) | 3 |
| Test specification, shock test (Drawings) | DIN EN 50155 (VDE 0115-200):2018-05 |
| Oxygen index (DIN EN ISO 4589-2) (Drawings) | >32 % |
| Sehemu ya msalaba ya kondakta AWG ya juu zaidi. (Vipimo) | 6 |
| Sehemu ya msalaba ya kondakta AWG ya chini (Vipimo) | 20 |
| Muunganisho katika acc. na kiwango (Vipimo) | IEC 60998-2-2 |
| Shock protection test specification (Drawings) | DIN EN 50274 (VDE 0660-514):2002-11 |
| Upeo wa juu wa sehemu nzima ya kondakta. (Vipimo) | 10 mm² |
| Sehemu nzima ya kondakta, sehemu ya chini kabisa (Vipimo) | 0.5 mm² |
| Flame test method (DIN EN 60695-11-10) (Drawings) | V0 |
| Flammability rating according to UL 94 (Drawings) | V0 |
| Smoke gas toxicity NFPA 130 (SMP 800C) (Drawings) | passed |
| Sehemu ya juu inayonyumbulika ya kondakta. (Vipimo) | 10 mm² |
| Sehemu ya chini inayonyumbulika ya kondakta (Vipimo) | 0.5 mm² |
| Muunganisho katika akaunti na (data ya muunganisho) | IEC 60998-2-2 |
| Oscillation, broadband noise test result (Drawings) | Test passed |
| Surface flammability NFPA 130 (ASTM E 162) (Drawings) | passed |
| Sehemu ya juu zaidi ya kondakta wa AWG, inayonyumbulika (Vipimo) | 8 |
| Sehemu ya chini ya kondakta wa AWG, inayonyumbulika (Vipimo) | 20 |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Data ya muunganisho) | V0 |
| Static insulating material application in cold (Drawings) | -60 °C |
| Behavior in fire for rail vehicles (DIN 5510-2) (Drawings) | Test passed |
| Calorimetric heat release NFPA 130 (ASTM E 1354) (Drawings) | 28 MJ/kg |
| Test specification, oscillation, broadband noise (Drawings) | DIN EN 50155 (VDE 0115-200):2018-05 |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 (Drawings) | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 (Drawings) | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 (Drawings) | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 (Drawings) | HL 1 - HL 3 |
| Specific optical density of smoke NFPA 130 (ASTM E 662) (Drawings) | passed |
| Relative insulation material temperature index (Elec., UL 746 B) (Drawings) | 130 °C |
| Proof of thermal characteristics (needle flame) effective duration (Drawings) | 30 s |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) (Drawings) | 130 °C |
| Sehemu ya msalaba ya kondakta inaweza kunyumbulika, ikiwa na kipete chenye kifuko cha plastiki cha juu zaidi. (Vipimo) | 10 mm² |
| Sehemu ya msalaba ya kondakta inaweza kunyumbulika, ikiwa na kipete chenye sehemu ya chini ya mkono wa plastiki. (Vipimo) | 0.5 mm² |
| Sehemu ya msalaba ya kondakta inaweza kunyumbulika, ikiwa na kipete kisicho na kifuko cha plastiki cha juu zaidi. (Vipimo) | 10 mm² |
| Sehemu ya msalaba ya kondakta inaweza kunyumbulika, ikiwa na kipete bila mkono wa plastiki. (Vipimo) | 0.5 mm² |
| Viendeshaji 2 vyenye sehemu moja ya msalaba, vimekwama, feri MAPACHA zenye sleeve ya plastiki, upeo. (Vipimo) | 2.5 mm² |
| Viendeshaji 2 vyenye sehemu moja ya msalaba, vimekwama, feri MAPACHA zenye sleeve ya plastiki, kiwango cha chini (Vipimo) | 0.5 mm² |
Maelezo ya Bidhaa
Distribution block, internally bridged, nominal voltage: 450 V, nominal current: 32 A, number of connections: 13, connection type: Push-in connection, Branch, cross-section: 0.2 mm² - 6 mm², Push-in c
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
Circuit diagram
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
