Kipatikana Bidhaa Maarufu
PT 6-T P/P HV
PT 6-T P/P HV 1028589 PHOENIX CONTACT Terminal interruptible, rated voltage: 1000 V, nominal current: 32 A, ..
$0.00USD
4591 kwenye hisa
Vipimo Muhimu
:You can check the rated current and the maximum load current on the rating curve.
Kina:63.1 mm
Upana:10.2 mm
Rangi:grey (RAL 7042)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| You can check the rated current and the maximum load current on the rating curve. | |
| Kina | 63.1 mm |
| Upana | 10.2 mm |
| Rangi | grey (RAL 7042) |
| Urefu | 91 mm |
| Matokeo | Approved Test |
| Spektramu | Category 2 durability test, on the bogie |
| Kiwango cha ASD | 6.12 (m/s²)²/Hz |
| Uwezekano | 1 |
| Mizunguko | 135 |
| masafa | f1= 5 Hz to f2= 250 Hz |
| Kipimo cha Kiume | A5 |
| Aina ya Mshtuko | Semi-sinusoid |
| Uchunguzi | In the overhead connection, the user must ensure that the necessary sections to surfaces that conduct electricity are met. |
| Urefu wa Maganda | 10 mm ... 12 mm |
| Mizunguko ya Kuziba | 250 |
| Kuongeza kasi | 3.12g |
| Aina ya Bidhaa | Sectional terminal block |
| Upande ulio wazi | No |
| Mapitio ya Makala | 03 |
| Depth in NS 32 | 69.3 mm |
| Idadi ya safu mlalo | 1 |
| Familia ya Bidhaa | PT |
| Kasi ya mzunguko | 10 r.p.m. |
| Jamii ya Kuongezeka | Iii |
| Sehemu ya Majina | 6 mm² |
| Mkondo wa nominella | 32 A |
| Volti ya kawaida | 1000 V |
| Maelekezo ya Mtihani | X, Y, and Z axes |
| Muda wa Utendaji | 30 sec |
| Aina ya ufungaji | NS 35/7.5 |
| Kina katika NS 35/15 | 71.8 mm |
| Kina katika NS 35/7.5 | 64.3 mm |
| Mizunguko ya Joto | 192 |
| Vipimo vya Mtihani | DIN EN 50155 (VDE 0115-200):2018-05 |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Nyenzo za kuhami joto | PA |
| Sehemu ya Reli/Uso wa Kurekebisha | NS 32/NS 35 |
| Sehemu ya Kondakta wa AWG | 20 ... 8 (Converted according to IEC) |
| Muda wa ajali | 18 ms |
| Idadi ya miunganisho | 2 |
| Muda wa jaribio kwa kila mhimili | 5 h |
| Sehemu ngumu ya kondakta | 0.5 mm² ... 10 mm² |
| Sehemu/Uzito wa Kondakta | 0.5 mm2/0.3 kg |
| Mahitaji ya jaribio la kupasha joto | Temperature rise ≤ 45 K |
| Kiwango cha Juu cha Kuchaji | 32 A (with rigid 10 mm² cable cross-section) |
| Nominal Value Test Force | 5 N |
| Kikundi cha nyenzo za kuhami joto | I |
| Sehemu ya kondakta inayonyumbulika | 0.5 mm² ... 10 mm² |
| Thamani ya Majina ya Voltage ya Jaribio | 9.8 kV |
| Halijoto ya Mazingira (Endesha) | -5 °C ... 70 °C |
| Sehemu ya Waya Inayonyumbulika [AWG] | 20 ... 8 (Converted according to IEC) |
| Halijoto ya Mazingira (Huduma) | -60 °C ... 110 °C (Operating temperature range incl. self-heating, max. short-term operating temperature; see RTI Elec.) |
| Muunganisho unaozingatia viwango | IEC 60947-7-1 |
| Halijoto ya Mazingira (Kuweka) | -5 °C ... 70 °C |
| Volti ya Muda ya Vipimo | 8 kV |
| Idadi ya miunganisho kwa kila ghorofa | 2 |
| Idadi ya migongano kwa kila usukani | 3 |
| Unyevu unaoruhusiwa wa hewa (huduma) | 20 % ... 90 % |
| Darasa la kuwaka kulingana na UL 94 | V0 |
| Sumu ya Gesi ya Flue ya NFPA 130 (SMP 800C) | approved |
| Permissible short-term current 4 mm² | 0.48 kA |
| Matumizi tuli ya nyenzo baridi za kuhami joto | -60 °C |
| Halijoto ya Mazingira (Uhifadhi/Usafiri) | -25 °C ... 60 °C (for a short time, no more than 24 hours, -60 °C to +70 °C) |
| Unyevu unaoruhusiwa wa hewa (uhifadhi/usafiri) | 30 % ... 70 % |
| Uwezo wa kuwaka wa Nyuso za NFPA 130 (ASTM E 162) | approved |
| Nguvu ya Juu Iliyosafishwa na Hali ya Majina | 1.31 W |
| Heat Emission Calorimeter NFPA 130 (ASTM E 1354) | 28 MJ/kg |
| Sehemu ya kebo inayonyumbulika (kifuniko cha vidole vya miguu chenye mkono wa plastiki) | 0.5 mm² ... 10 mm² |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Sehemu ya kebo inayonyumbulika (kifuniko cha vidole bila mkono wa plastiki) | 0.5 mm² ... 10 mm² |
| Uzito wa Gesi ya Flue ya Optiki ya NFPA 130 (ASTM E 662) | approved |
| Kielelezo cha Joto la Nyenzo za Kuhami Uhusiano (Elec., UL 746 B) | 130 °C |
| Viendeshaji 2 vyenye sehemu moja, vinavyonyumbulika na kofia ya vidole viwili yenye kifuniko cha plastiki | 0.5 mm² ... 2.5 mm² If TWIN bushings are used, we recommend a minimum standard bushing length of 13 mm. |
Maelezo ya Bidhaa
Interruptible terminal block, nominal voltage: 1000 V, nominal current: 32 A, connection type: Push-in connection, Dimensioning cross-section: 6 mm², cross-section: 0.5 mm² - 10 mm², mounting: NS 35/7
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
