Kipatikana Bidhaa Maarufu
PSR-MM30-2NO-2DO-24DC-SC
PSR-MM30-2NO-2DO-24DC-SC 2702357 PHOENIX CONTACT Two-channel zero-speed and over-speed safety relays up to S..
$0.00USD
3962 kwenye hisa
Vipimo Muhimu
GTIN:4055626133225
Ufunguo wa kuagiza:2702357
(Michoro):
Ukurasa wa katalogi:Page 243 (C-6-2019)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4055626133225 |
| Ufunguo wa kuagiza | 2702357 |
| (Michoro) | |
| Ukurasa wa katalogi | Page 243 (C-6-2019) |
| Kina (Dokezo) | 114.5 mm |
| Kitengo cha kufungasha | 1 pc |
| Upana (Dokezo) | 22.5 mm |
| Urefu (Dokezo) | 112.2 mm |
| (Usambazaji wa umeme) | 2.5 s (MI1, MI2) |
| (Matokeo ya kengele) | < 150 ms (For Usmanual, monitored start) |
| Torque (Jumla) | 0.5 Nm ... 0.6 Nm |
| UNSPSC 11 (ETIM) | 39121501 |
| (Ingizo za kidijitali) | 2.5 V DC ... 5 V DC (High) |
| Nchi ya asili | DE (Germany) |
| ETIM 3.0 (eCl@ss) | EC001449 |
| ETIM 4.0 (eCl@ss) | EC001449 |
| ETIM 5.0 (eCl@ss) | EC001448 |
| ETIM 6.0 (eCl@ss) | EC001448 |
| ETIM 7.0 (eCl@ss) | EC001448 |
| Uzito halisi (Times) | 196.3 g |
| Aina ya reli (Saa) | Electromechanical relay with forcibly guided contacts in accordance with IEC/EN 61810-3 (EN 50205) |
| UNSPSC 13.2 (ETIM) | 39122331 |
| UNSPSC 18.0 (ETIM) | 39122331 |
| UNSPSC 19.0 (ETIM) | 39122331 |
| UNSPSC 20.0 (ETIM) | 39122331 |
| UNSPSC 21.0 (ETIM) | 39122331 |
| UNSPSC 6.01 (ETIM) | 30211901 |
| (Kupima pembejeo) | 5 A (250 V (AC15)) |
| UNSPSC 12.01 (ETIM) | 39121501 |
| inayoweza kuchomekwa (Jumla) | Yes |
| Nambari ya ushuru maalum | 90328900 |
| UNSPSC 7.0901 (ETIM) | 39121501 |
| Rangi ya nyumba (Times) | yellow |
| Aina ya kupachika (Wakati) | DIN rail mounting |
| Uzi wa skrubu (Jumla) | M3 |
| Onyesho la hali (Nyakati) | 2x LED green (OUT1, OUT2) |
| Nyenzo za makazi (Times) | PBT |
| Jina la kuingiza (Ugavi wa umeme) | Operating mode and monitoring inputs |
| Nafasi ya kupachika (Times) | vertical or horizontal |
| Kategoria (Data ya muunganisho) | 4 |
| Muda wa kuchuja (Usambazaji wa umeme) | max. 2 ms (Test pulse width; low test pulses for operating mode and monitoring inputs) |
| Usahihi (Ingizo za kidijitali) | ± 2 % (in reference to the parameterized limit value) |
| Urefu wa kukatwa (Jumla) | 7 mm |
| Mbinu ya muunganisho (Jumla) | Screw connection |
| Input name (Digital inputs) | Encoder input |
| (Viwango na Kanuni) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Kiwango cha ulinzi (Times) | IP20 |
| Muda wa kuanzisha upya (matokeo ya kengele) | < 1 s (Boot time) |
| eCl@ss 4.0 (Uainishaji) | 27371102 |
| eCl@ss 4.1 (Uainishaji) | 27371102 |
| eCl@ss 5.0 (Uainishaji) | 27371901 |
| eCl@ss 5.1 (Uainishaji) | 27371901 |
| eCl@ss 6.0 (Uainishaji) | 27371800 |
| eCl@ss 7.0 (Uainishaji) | 27371811 |
| eCl@ss 8.0 (Uainishaji) | 27371811 |
| eCl@ss 9.0 (Uainishaji) | 27371811 |
| Maagizo ya mkutano (Saa) | See derating curve |
| Uteuzi (Data ya muunganisho) | EN 62061 |
| Mkondo wa kukimbilia (Ugavi wa umeme) | < 5 mA |
| Urefu wa juu zaidi (Vipimo) | ≤ 2000 m (Above sea level) |
| Muda wa kurejesha (matokeo ya kengele) | < 1 s |
| Hali ya uendeshaji ya nominella (Saa) | 100% operating factor |
| Fuse ya kutoa (Inapima pembejeo) | 6 A gL/gG |
| Jina la matokeo (Kupima pembejeo) | Enabling current path |
| Aina ya mawasiliano (Inapima pembejeo) | 2 enabling current paths |
| Discrepancy time (Power supply) | 2 s (I1, I2, I3) |
| Mkondo wa kuingilia (Pembejeo za kidijitali) | < 12 mA |
| Idadi ya pembejeo (Ugavi wa umeme) | 1 (Non-safety-related start input: S34) |
| Kategoria ya Kusimamisha (Data ya muunganisho) | 0 |
| Muda wa kuchelewa (matokeo ya kengele) | 0 s ... 10 s ±10 % (Adjustable switch-on delay for downtime contacts 23/24) |
| Uteuzi (Hali za mazingira) | A1/A2 |
| Muda wa kuchuja (Hali ya mazingira) | 2 ms (at A1 in the event of voltage dips at Us) |
| HTL signal form (Digital inputs) | 0 V DC ... 3 V DC (Low) |
| Limit frequency (Digital inputs) | max. 400 kHz |
| TTL signal form (Digital inputs) | 0 V DC ... 0.9 V DC (Low) |
| Mkondo wa kukimbilia (Kupima pembejeo) | min. 3 mA |
| Idadi ya pembejeo (Pembejeo za kidijitali) | 1 (Safety-related encoder input, RJ45) |
| Onyesho la volteji ya uendeshaji (Times) | 1 x green LED (PWR) |
| Matumizi ya sasa (Ugavi wa umeme) | typ. 4 mA (at US) |
| Utilization restriction (Drawings) | EMC: class A product, see manufacturer's declaration in the download area |
| Nyenzo ya mguso (Kupima pembejeo) | AgSnO2 |
| Mkondo wa kukimbilia (Hali ya mazingira) | < 18 A (Δt = 500 µs at Us) |
| Saketi ya kinga (Pembejeo za dijitali) | 33 V suppressor diode |
| Matumizi ya sasa (Pembejeo za kidijitali) | < 3 mA (Per track for US) |
| Idadi ya matokeo (Kupima pembejeo) | 2 (safety-related N/O contacts: 13/14, 23/24) |
| Jumla ya mkondo wa mraba (Inapima pembejeo) | 72 A2(observe derating) |
| Voltage ya kubadili (Inapima pembejeo) | min. 12 V AC/DC |
| Uzito kwa Kipande (bila kujumuisha upakiaji) | 200.000 g |
| (Data ya sifa zinazohusiana na usalama) | Safe isolation, reinforced insulation 6 kV between input circuit (A1/A2, I1, I2, I3, MI1, MI2, IN1, IN2, S34, MO1, MO2, RJ45, USB) and the enabling current paths (13/14, 23/24) |
| Maelezo ya matokeo (Kupima pembejeo) | 2 NO contacts each in series, without delay, floating |
| Uwezo wa kubadili (Kupima pembejeo) | min. 60 mW |
| RoHS ya China (Viwango na Kanuni) | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Viwango na Kanuni) | Lead 7439-92-1 |
| Masafa ya kubadili (Kupima pembejeo) | max. 0.5 Hz |
| Maelezo ya ingizo (Ugavi wa umeme) | NPN, IEC 61131-2, type 1 |
| Mzunguko wa kinga (Hali ya mazingira) | Serial protection against polarity reversal 33 V suppressor diode |
| Kiwango cha utendaji (PL) (Data ya muunganisho) | e (6 A DC1, 17520 switching cycles/year) |
| Sine/cosine signal form (Digital inputs) | 2 V DC ... 3 V DC (1 Vppdifferential signal) |
| Maelezo ya ingizo (Ingizo za kidijitali) | TTL, HTL, Sin/Cos |
| Sehemu ya juu ya kondakta AWG. (Jumla) | 12 |
| Sehemu ya msalaba ya kondakta AWG dakika. (Jumla) | 24 |
| Muda wa huduma ya mitambo (Kupima pembejeo) | 10x 106cycles |
| Mshtuko (Data ya sifa zinazohusiana na usalama) | 15g |
| Saketi/kipengele cha kinga (Ugavi wa umeme) | 33 V suppressor diode |
| Muda wa kawaida wa majibu Marekani (matokeo ya kengele) | < 200 ms (For Usautostart) |
| Halijoto ya mazingira (uendeshaji) (Vipimo) | -40 °C ... 55 °C (observe derating) |
| Upeo wa juu wa sehemu nzima ya kondakta. (Jumla) | 2.5 mm² |
| Sehemu nzima ya kondakta dakika 1. (Jumla) | 0.2 mm² |
| Matumizi ya umeme Marekani (Hali ya mazingira) | typ. 1.78 W |
| Ingiza ishara ya masafa ya sasa "0" (Usambazaji wa umeme) | 0 mA ... 1.5 mA |
| Ishara ya voltage ya kuingiza "0" (Usambazaji wa umeme) | 0 V DC ... 5 V DC |
| Ishara ya voltage ya kuingiza "1" (Usambazaji wa umeme) | 15 V DC ... 30 V DC |
| Mkondo (matokeo ya kupokezana: kuwezesha njia ya mkondo) | max. 100 mA |
| Kupunguza mkondo unaoendelea (Kupima pembejeo) | 6 A |
| Kiwango cha Uadilifu wa Usalama (SIL) (Data ya muunganisho) | 3 |
| Volti (Matokeo ya relay: kuwezesha njia ya mkondo) | approx. 22 V DC (Us- 2 V) |
| Sehemu ya juu inayonyumbulika ya kondakta. (Jumla) | 2.5 mm² |
| Sehemu ya msalaba ya kondakta yenye sehemu ndogo inayonyumbulika (Jumla) | 0.2 mm² |
| Input current range "0" signal (Digital inputs) | 0 mA ... 1.5 mA |
| Input voltage range "0" signal (Digital inputs) | 0 V DC ... 5 V DC |
| Input voltage range "1" signal (Digital inputs) | 15 V DC ... 30 V DC |
| Uteuzi (Data ya sifa zinazohusiana na usalama) | Air clearances and creepage distances between the power circuits |
| Kiwango cha chini cha ulinzi wa eneo la ndani (Times) | IP54 |
| Halijoto ya kawaida (uhifadhi/usafiri) (Vipimo) | -40 °C ... 70 °C |
| Udhibiti uliokadiriwa wa usambazaji wa sasa wa IS (Hali za mazingira) | typ. 74 mA |
| Kiwango cha uchafuzi wa mazingira (Takwimu za sifa zinazohusiana na usalama) | 2 |
| Idadi ya matokeo (Matokeo ya kupokezana: kuwezesha njia ya sasa) | 2 (Non-safety-related signal outputs: MO1, MO2) |
| Maelezo ya matokeo (Matokeo ya kupokezana: kuwezesha njia ya sasa) | PNP |
| Kategoria ya volteji kupita kiasi (Data ya sifa zinazohusiana na usalama) | III |
| Unyevu wa juu unaoruhusiwa (uhifadhi/usafiri) (Vipimo) | 75 % (on average, 85% infrequently, non-condensing) |
| Viwango/kanuni (Takwimu za sifa zinazohusiana na usalama) | DIN EN 50178, EN 60947-5-1 |
| Mtetemo (uendeshaji) (Data ya sifa zinazohusiana na usalama) | 10 Hz ... 150 Hz, 2g |
| Kiwango cha juu cha unyevu kinachoruhusiwa (utendaji) (Vipimo) | 75 % (on average, 85% infrequently, non-condensing) |
| Upinzani wa jumla wa kondakta unaoruhusiwa (Ugavi wa umeme) | 150 Ω |
| Volti ya usambazaji wa saketi ya udhibiti iliyokadiriwa Marekani (Hali za mazingira) | 24 V DC -15 % / +10 % (provide external protection) |
| Kiwango cha juu cha mkondo wa kuingilia (Matokeo ya kupokezana: kuwezesha njia ya mkondo) | 500 mA (Δt = 1 ms at Us) |
| Volti ya insulation iliyokadiriwa (Data ya sifa zinazohusiana na usalama) | 250 V AC |
| Kikomo cha Madai ya Kiwango cha Uadilifu wa Usalama (SIL CL) (Data ya muunganisho) | 3 |
| Upinzani wa jumla wa kondakta unaoruhusiwa wa kiwango cha juu zaidi (Pembejeo za dijitali) | 150 Ω |
| Ulinzi wa mzunguko mfupi (Matokeo ya relay: kuwezesha njia ya mkondo) | no |
| Switching capacity according to IEC 60947-5-1 (Measuring inputs) | 4 A (24 V (DC13)) |
| Protective circuit/component (Relay outputs: enabling current path) | 33 V suppressor diode |
| Volti/insulation ya kuongezeka iliyokadiriwa (Data ya sifa zinazohusiana na usalama) | Basic insulation 4 kV between all current paths and housing |
Maelezo ya Bidhaa
2-channel speed and stop controller up to SIL 3, category 4, PL e, 2 safe relay outputs, suitable for connection of HTL, TTL or Sen/Cos encoders as well as proximity detectors, plug-in screw terminal,
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
Circuit diagram
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
