


| Kipengele | Thamani |
|---|---|
| Jina | NPF-60D-24 |
| Jimbo | Recommended Model |
| Hisa | Yes |
| Muundo | Box |
| Mfululizo | NPF-60D |
| Kufifia | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| Idhini | CCC, CE, ENEC, UL |
| Nguvu (W) | 60,00 |
| Fomu ndogo | IP67 |
| Upana (mm) | 53.00 |
| Urefu (mm) | 35.00 |
| Kiwango cha juu cha kuingiza AC | 305,00 |
| Kiwango cha chini cha kuingiza AC | 90,00 |
| Maombi | Lighting |
| Mtengenezaji | MEAN WELL |
| Aina ya bidhaa | LED Driver |
| Kutengwa (V) | 3.750,00 |
| Nguvu ya Kilele (W) | Sixty |
| Kiunganishi cha kuingiza data | Cable |
| Masafa ya kuingiza | 50 Hz, 60 Hz |
| Muda Mrefu/Usuli | 150.00 |
| Maelezo Marefu | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box Waterproof plasticIP67.Input range90-305Vca47-63Hz.Output in constant current2,5 A.Range of output voltage14.4 to 24vdcaccording to demade the load.Power:60W.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,95to 230vac at full load.Consumption without load <0,50 W.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):150 x 53 x 35mm.5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power.With plastic housing, watertight, designed for lighting applications in indoor, decorative, architectural, signage, mobile (roads, screens...) or tunnel lighting. Suitable for damp and wet conditions. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Kiunganishi cha kutoa | Cable |
| Aina ya Kiingilio CA | Single-phase |
| Dhamana (Miaka) | 5,00 |
| Nchi ya Asili | China |
| Mkondo wa kutoa mA | Two thousand five hundred |
| Kiwango cha Chini cha Pato (mA) | 2.500,00 |
| Kiwango cha Upeo wa Pato (mA) | 2.500,00 |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji