


| Kipengele | Thamani |
|---|---|
| Bidhaa | Servo Motor |
| Aina | Ultra low inertia |
| Shimoni | Key-way, center tap |
| Vipengele | Compact Servo Only for Position Control. |
| Muhuri wa mafuta | without |
| Ufungashaji | IP65 |
| Uzito (kg) | 0.96 |
| Nambari ya Sehemu | MUMA022P1S |
| Jina la bidhaa | MINAS E series Servo Motor |
| Matokeo yaliyokadiriwa | 200 W |
| Breki ya kushikilia | without |
| Kuhusu Ufungashaji | Except rotating portion of output shaft and leadwire end. |
| Torque iliyokadiriwa (N ⋅ m) | 0.64 |
| Vipimo vya volteji | 200 V |
| Mkondo uliokadiriwa (A (rms)) | 1.6 |
| Hali za Mazingira | For more details, please refer to the instruction manual. |
| Kisimbaji cha Rotary: Azimio | 10000 |
| Kasi ya mzunguko iliyokadiriwa (r/min) | 3000 |
| Kisimbaji cha Rotary: vipimo | 2500 P/r Incremental |
| Kuhusu masafa ya breki ya kuzaliwa upya | Note) 1. Regenerative brake frequency represents the frequency of the motor's stops from the rated speed with deceleration without load.⋅ If the load is connected, frequency will be defined as 1/( m + 1 ), where m = ( load moment of inertia ) / ( rotor moment of inertia ).⋅ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to the square of ( running speed / rated speed ).⋅ Power supply voltage is AC115 V ( at 100 V of the main voltage ). If the supply voltage fluctuates, frequency is in inverse proportion to the square of ( Running supply voltage /115 ) relative to the value in the table.⋅ When regeneration occurs continuosly such cases as running speed frequently changes or vertical feeding, consult us or a dealer.Note) 2. If the effective torque is within the rated torque, there is no limit in regenerative brake. |
| Kasi ya juu zaidi ya mzunguko (r/min) iliyokadiriwa | 5000 |
| Kilele cha juu cha muda mfupi (N ⋅ m) | 1.91 |
| Masafa ya breki zinazorejesha (mara/dakika) | Without option :No limitWith option :No limitOption (External regenerative resistor) Part No. : DV0P2891 |
| Wakati wa hali ya kutofanya kazi kwa rotor (x10-4kg ⋅ m²) | 0.10 |
| Uwiano uliopendekezwa wa wakati wa hali ya mzigo na rotor | 30 times or less |
| Kuhusu uwiano uliopendekezwa wa wakati wa hali ya mzigo na rotor | Note) 3. Consult us or a dealer if the load moment of inertia exceeds the specified value. |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji