Kipatikana Bidhaa Maarufu
MSTBT 2,5 HC/ 3-STP BU TP:L2 OUT
MSTBT 2,5 HC/ 3-STP BU TP:L2 OUT 1451378 PHOENIX CONTACT Connector for printed circuit board, nominal sectio..
$2.63USD
3845 kwenye hisa
Vipimo Muhimu
:• WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired.
Kiungo:Screw connection with cage
Hatua:5 mm
noti:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| • WARNING: Only operate products in perfect condition. Regularly check the products for damage. Immediately take out defective products. Replace the damaged products. The item cannot be repaired. | |
| Kiungo | Screw connection with cage |
| Hatua | 5 mm |
| noti | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| aina | Standard |
| Matokeo | Test passed |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Masafa | 10 - 150 - 10 Hz |
| Upana [w] | 15 mm |
| Urefu [h] | 15 mm |
| Urefu [l] | 18.1 mm |
| Kasi ya Kufagia | 1 octave/min |
| Rangi (Kisanduku) | Blue (5015) |
| Idadi ya nguzo | 3 |
| Mstari wa Bidhaa | COMBICON Connectors M |
| Aina ya Bidhaa | Printed circuit board connector |
| Aina ya Kubana | absent |
| Kurekebisha flange | absent |
| Idadi ya safu mlalo | 1 |
| Familia ya Bidhaa | MSTBT 2.5 HC/.. -STP |
| Kumaliza Uso | Hot-dip galvanizing |
| Mfumo wa kiunganishi | COMBICON MSTB 2.5 HC |
| Nyenzo ya Mawasiliano | Cu Alloy |
| Volti ya AC isiyobadilika | 3.1 kV |
| Upinzani wa Misa | 1.2 mΩ |
| Idadi ya mizunguko | 25 |
| Imekadiriwa Sasa IN | 16 A |
| Volti iliyokadiriwa UN | 250 V |
| Kukaza torque | 0.5 Nm ... 0.6 Nm |
| Mizunguko ya ujanja | 25 |
| Dokezo la Uendeshaji | According to DIN EN 61984, COMBICON connectors are switchable powerless (COC) connectors. For intended use, they must not be plugged in or disconnected when they are still energized or under load. |
| Vipimo vya Mtihani | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Mchoro wa Vipimo | |
| Nyenzo ya insulation | PA |
| Upinzani wa Misa R1 | 1.2 mΩ |
| Upinzani wa Misa R2 | 1.23 mΩ |
| Maagizo ya usalama | WARNING: Connectors must not be connected or disconnected under load. Failure to comply with it and use it in accordance with the rules may result in damage to persons and/or property. |
| Sehemu mtambuka ya nominella | 2.5 mm² |
| Volti ya ukubwa (II/2) | 630 V |
| Idadi ya nguzo zilizojaribiwa | 4 |
| Volti ya ukubwa (III/2) | 320 V |
| Volti ya ukubwa (III/3) | 250 V |
| Muda wa jaribio kwa kila ekseli | 2.5 h |
| Aina ya Muunganisho wa Mawasiliano | female |
| Mkazo unaosababishwa na kutu | 1.0 dm3KNOW2on 300 dm3/40 °C/3 cycles |
| Kikundi cha Nyenzo za Insulation | The |
| CTI kulingana na IEC 60112 | 600 |
| AWG ya sehemu mtambuka ya kondakta | 24 ... 12 |
| Volti ya Msukumo Iliyokadiriwa (II/2) | 4 kV |
| Kipimo cha Bafa Axb / kipenyo | 2.8 mm x 2.0 mm / 2.4 mm |
| Thamani ya chini kabisa ya kuteleza (II/2) | 3.2 mm |
| Volti ya msukumo iliyokadiriwa (III/2) | 4 kV |
| Volti ya msukumo iliyokadiriwa (III/3) | 4 kV |
| Sehemu ngumu ya kondakta | 0.2 mm² ... 2.5 mm² |
| Ukubwa wa Voltage ya Msukumo (II/2) | 4 kV |
| Halijoto ya kawaida (kuweka) | -5 °C ... 100 °C |
| Thamani ya chini kabisa (III/2) | 1.6 mm |
| Thamani ya chini kabisa (III/3) | 3.2 mm |
| Volti ya Kutenga Iliyokadiriwa (II/2) | 630 V |
| Ukubwa wa Voltage ya Msukumo (III/2) | 4 kV |
| Ukubwa wa voltage ya msukumo (III/3) | 4 kV |
| Nguvu ya mvutano kwa kila nguzo takriban. | 7 N |
| Halijoto ya mazingira (inayofanya kazi) | -40 °C ... 105 °C (depending on the derating curve) |
| Volti ya Kutenga Iliyokadiriwa (III/2) | 320 V |
| Sehemu ya msalaba ya kondakta inayobadilika | 0.2 mm² ... 2.5 mm² |
| Nguvu ya kuingiza kwa kila nguzo takriban. | 11 N |
| Volti ya insulation iliyokadiriwa (III/3) | 250 V |
| Mkazo kutokana na athari ya joto | 100 °C/168 h |
| Mwelekeo wa muunganisho wa kondakta/bodi | 0 ° |
| Urefu wa sehemu itakayovuliwa | 7 mm |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 55 °C |
| Darasa la mwako kulingana na UL 94 | V0 |
| Mvutano wa msukumo wima juu ya usawa wa bahari | 4.8 kV |
| Unyevu wa jamaa (usafiri na uhifadhi) | 30 % ... 70 % |
| Eneo la mguso wa uso wa chuma (safu ya uso) | Tin (4 - 8 μm Sn) |
| Viendeshaji 2 vya sehemu msalaba sawa, ngumu | 0.2 mm² ... 1 mm² |
| Upinzani wa Insulation Kati ya Nguzo Zilizoungana | > 21 TΩ |
| Uso wa Chuma, Sehemu ya Kuunganisha (Safu ya Uso) | Tin (4 - 8 μm Sn) |
| Viendeshaji 2 vya sehemu inayoweza kunyumbulika inayofanana | 0.2 mm² ... 1.5 mm² |
| Thamani ya chini kabisa ya utambaaji - safu isiyo sawa (II/2) | 3 mm |
| Thamani ya chini kabisa ya kutambaa - safu isiyo sawa (III/2) | 3 mm |
| Thamani ya chini kabisa ya kibali - masafa yasiyo sawa (III/3) | 3 mm |
| Upinzani dhidi ya mikondo ya uso (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Joto la mtihani wa ugumu wa Brinell kulingana na EN 60695-10-2 | 125 °C |
| Joto la kuwasha la filamenti ya GWIT kulingana na EN 60695-2-13 | 775 |
| Kielezo cha kuwaka kwa filamenti ya GWFI kulingana na EN 60695-2-12 | 850 |
| Sehemu ya msalaba ya kondakta inayonyumbulika yenye lug iliyowekwa na kola ya plastiki | 0.25 mm² ... 2.5 mm² |
| Sehemu ya msalaba ya kondakta inayonyumbulika yenye kebo bila kola ya plastiki | 0.25 mm² ... 2.5 mm² |
| Sehemu mtambuka ya kondakta/aina ya kondakta/thamani ya kawaida ya nguvu ya mvutano/thamani halisi | 0.2 mm² / rigid / > 10 N |
| Viendeshaji 2 vya sehemu moja inayonyumbulika yenye kipete bila kola ya plastiki | 0.25 mm² ... 1 mm² |
| Viendeshaji 2 vya sehemu mtambuka vinavyofanana vinavyonyumbulika vyenye kipete cha TWIN chenye kola ya plastiki | 0.5 mm² ... 1.5 mm² |
Maelezo ya Bidhaa
Printed circuit board connector
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
