


| Kipengele | Thamani |
|---|---|
| Bidhaa | MINAS A4 Family Servo motor |
| Aina | Low inertia |
| Shimoni | Key-way, Shaft end, Center tap |
| Tamko | 1. About Regenerative brake frequencythe frequency of the motor's stops from the rated speed with deceleration without load.. If the load is connected, frequency will be defines as 1/(m+1), where m=load moment of inertia/rotor moment of inertia.・ When the motor speed exceeds the rated speed, regenerative brake frequency is in inverse proportion to thesquare of (running speed/rated speed).・Power supply voltage is AC115 V(at 100 V of the main voltage)、AC230 V(at 200 V of the main voltage).If the supply voltage fluctuates, frequency is in inverse proportion to the square of (Running supply voltage)relative to the value in the table.・When regeneration occurs continuously such cases as running speed frequently changes or vertical feeding, consult us ora dealer.2. About unlimited regenerative brake frequencyIf the effective torque is within the rated torque, there is no limit in generative brake.3. About recommended moment of inertia ratio of the load and the rotorConsult us or a dealer if the load moment of inertia exceeds the specified value.For details, check the catalog and instruction manuals. |
| Mfululizo | MSMD Series |
| Maelezo | Low inertia, Lead wire type, IP65 |
| Muhuri wa mafuta | without |
| Ufungashaji | IP65 |
| Uzito (kg) | 1.2 |
| Jina la Familia | MINAS A4 Family |
| Nambari ya Sehemu | MSMD042P1S |
| Jina la bidhaa | MINAS A4 Family Servo Motor |
| Matokeo yaliyokadiriwa | 400 W |
| Breki ya kushikilia | without |
| Kuhusu Ufungashaji | Except rotating portion of output shaft and leadwire end. |
| Kipimo cha mraba cha flange | 60 mm sq. |
| Mkondo wa juu zaidi (A (op)) | 11.0 |
| Torque iliyokadiriwa (N ⋅ m) | 1.3 |
| Vipimo vya volteji | 200 V |
| Kiunganishi cha kisimbaji cha injini | Lead wire |
| Hali za Mazingira | For more details, please refer to the instruction manual. |
| Mpangilio wa injini ya kutoa moshi | Lead wire |
| Kipimo cha mraba cha flange (Kitengo:mm) | 60 |
| Kasi ya mzunguko iliyokadiriwa (r/min) | 3000 |
| Kisimbaji cha Rotary: vipimo | 2500 P/r Incremental system |
| Kasi ya juu zaidi ya mzunguko (r/min) iliyokadiriwa | 5000 |
| Kilele cha juu cha muda mfupi (N ⋅ m) | 3.8 |
| Masafa ya breki zinazorejesha (mara/dakika) | Without option :No limitWith option : No limitOption (External regenerative resistor) Part No. : DV0P4283 |
| Wakati wa hali ya kutofanya kazi kwa rotor (x10-4kg ⋅ m²) | 0.26 |
| Uwiano uliopendekezwa wa wakati wa hali ya mzigo na rotor | 30times or less |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji