Kipatikana Bidhaa Maarufu
MKDSN 2,5/ 3 BK PA1,3
MKDSN 2,5/ 3 BK PA1,3 1536666 PHOENIX CONTACT PCB terminal, rated current: 24 A, rated voltage (III/2): 400 ..
$0.00USD
4674 kwenye hisa
Vipimo Muhimu
:0.2 mm² / rigid / > 10 N
Kiungo:Screw connection with cage
Hatua:5 mm
noti:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| 0.2 mm² / rigid / > 10 N | |
| Kiungo | Screw connection with cage |
| Hatua | 5 mm |
| noti | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| aina | Modular PCB terminal block |
| Matokeo | Test passed |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Masafa | 10 - 150 - 10 Hz |
| Ufungashaji | Packed in carton |
| Upana [w] | 15 mm |
| Urefu [h] | 18.5 mm |
| Urefu [l] | 9.5 mm |
| Mpangilio wa Pin | Linear Pinning |
| Ukubwa wa shank | 0.8 x 0.9 mm |
| Kasi ya Kufagia | 1 octave/min |
| Halijoto | 850 °C |
| Rangi (Kisanduku) | Black (9005) |
| Idadi ya nguzo | 3 |
| Dokezo la matumizi | A predefined tightening torque must always be observed for secure connection. Especially in the case of two- and three-pole PCB terminals, the single contact soldering tip may not block them. For this reason, the terminals must be reinforced when connecting (fixed by hand, reinforcement on the housing). |
| Mstari wa Bidhaa | COMBICON Terminals M |
| Aina ya Bidhaa | PCB terminal block |
| Kipenyo cha shimo | 1.3 mm |
| Aina ya kupachika | Wave Soldering |
| Idadi ya safu mlalo | 1 |
| Familia ya Bidhaa | MKDSN 2.5 |
| Kumaliza Uso | Galvanic tin plating |
| Nyenzo ya Mawasiliano | Cu Alloy |
| Imekadiriwa Sasa IN | 24 A |
| Volti iliyokadiriwa UN | 400 V |
| Kukaza torque | 0.5 Nm ... 0.6 Nm |
| Vipimo vya Mtihani | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Mchoro wa Vipimo | |
| Urefu wa Ufungaji | 15 mm |
| Nyenzo ya insulation | PA |
| Sehemu mtambuka ya nominella | 2.5 mm² |
| Volti ya ukubwa (II/2) | 630 V |
| Urefu wa Shina la Kulehemu [P] | 3.5 mm |
| Volti ya ukubwa (III/2) | 400 V |
| Volti ya ukubwa (III/3) | 250 V |
| Muda wa jaribio kwa kila ekseli | 2.5 h |
| Muda wa maombi | 5 s |
| Kichwa cha skrubu cha aina ya kifaa | Philipps Recess with longitudinal slit (H1L) |
| Kikundi cha Nyenzo za Insulation | The |
| CTI kulingana na IEC 60112 | 600 |
| AWG ya sehemu mtambuka ya kondakta | 24 ... 14 |
| Volti ya Msukumo Iliyokadiriwa (II/2) | 4 kV |
| Thamani ya chini kabisa ya kuteleza (II/2) | 3.2 mm |
| Volti ya msukumo iliyokadiriwa (III/2) | 4 kV |
| Volti ya msukumo iliyokadiriwa (III/3) | 4 kV |
| Sehemu ngumu ya kondakta | 0.2 mm² ... 2.5 mm² |
| Ukubwa wa Voltage ya Msukumo (II/2) | 4 kV |
| Halijoto ya kawaida (kuweka) | -5 °C ... 100 °C |
| Thamani ya chini kabisa (III/2) | 3 mm |
| Thamani ya chini kabisa (III/3) | 3.2 mm |
| Volti ya Kutenga Iliyokadiriwa (II/2) | 630 V |
| Ukubwa wa Voltage ya Msukumo (III/2) | 4 kV |
| Ukubwa wa voltage ya msukumo (III/3) | 4 kV |
| Halijoto ya mazingira (inayofanya kazi) | -40 °C ... 100 °C (Depending on current flow curve/derating curve) |
| Volti ya Kutenga Iliyokadiriwa (III/2) | 400 V |
| Sehemu ya msalaba ya kondakta inayobadilika | 0.2 mm² ... 2.5 mm² |
| Sharti la uthibitisho wa joto | The sum of the ambient temperature and the heating of the PCB terminal should not exceed the upper limit of the temperature. |
| Volti ya insulation iliyokadiriwa (III/3) | 250 V |
| Urefu wa sehemu itakayovuliwa | 6.5 mm |
| Idadi ya Pini za Kulehemu kwa Kila Uwezo | 1 |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 70 °C |
| Darasa la mwako kulingana na UL 94 | V0 |
| Unyevu wa jamaa (usafiri na uhifadhi) | 30 % ... 70 % |
| Eneo la Kuchomea Chuma Uso (Safu ya Uso) | Tin (4 - 8 μm Sn) |
| Viendeshaji 2 vya sehemu msalaba sawa, ngumu | 0.2 mm² ... 0.75 mm² |
| Upinzani wa Insulation Kati ya Nguzo Zilizoungana | > 5 MΩ |
| Uso wa Chuma, Sehemu ya Kuunganisha (Safu ya Uso) | Tin (4 - 8 μm Sn) |
| Viendeshaji 2 vya sehemu inayoweza kunyumbulika inayofanana | 0.2 mm² ... 0.75 mm² |
| Thamani ya chini kabisa ya utambaaji - safu isiyo sawa (II/2) | 3 mm |
| Thamani ya chini kabisa ya kutambaa - safu isiyo sawa (III/2) | 3 mm |
| Thamani ya chini kabisa ya kibali - masafa yasiyo sawa (III/3) | 3 mm |
| Upinzani dhidi ya mikondo ya uso (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Joto la mtihani wa ugumu wa Brinell kulingana na EN 60695-10-2 | 125 °C |
| Joto la kuwasha la filamenti ya GWIT kulingana na EN 60695-2-13 | 775 |
| Kielezo cha kuwaka kwa filamenti ya GWFI kulingana na EN 60695-2-12 | 850 |
| Sehemu ya msalaba ya kondakta inayonyumbulika yenye lug iliyowekwa na kola ya plastiki | 0.25 mm² ... 2.5 mm² |
| Sehemu ya msalaba ya kondakta inayonyumbulika yenye kebo bila kola ya plastiki | 0.25 mm² ... 2.5 mm² |
| Sehemu mtambuka ya kondakta/aina ya kondakta/thamani ya kawaida ya nguvu ya mvutano/thamani halisi | 0.2 mm² / flexible / > 10 N |
| Viendeshaji 2 vya sehemu moja inayonyumbulika yenye kipete bila kola ya plastiki | 0.25 mm² ... 0.75 mm² |
| Viendeshaji 2 vya sehemu mtambuka vinavyofanana vinavyonyumbulika vyenye kipete cha TWIN chenye kola ya plastiki | 0.5 mm² ... 1.5 mm² |
Maelezo ya Bidhaa
PCB terminal block, rated current: 24 A, dimensioning voltage (III/2): 400 V, nominal cross-section: 2.5 mm2, number of rows: 1, number of poles per row: 3, product series: MKDSN 2.5, pitch: 5 mm, con
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
