Kipatikana Bidhaa Maarufu
MKDSC 3/ 2 SO BJ 2
MKDSC 3/ 2 SO BJ 2 1880834 PHOENIX CONTACT PCB terminal block
$0.00USD
3007 kwenye hisa
Vipimo Muhimu
Dokezo:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Lami:5 mm
Mstari wa bidhaa:COMBICON Terminals M
Aina ya bidhaa:Printed circuit board terminal
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Dokezo | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Lami | 5 mm |
| Mstari wa bidhaa | COMBICON Terminals M |
| Aina ya bidhaa | Printed circuit board terminal |
| Aina ya kupachika | Wave soldering |
| Vipimo | IEC 60664-1:2007-04 |
| Idadi ya safu mlalo | 1 |
| Familia ya bidhaa | MKDSC 3 |
| Rangi (Nyumba) | green (6021) |
| Marekebisho ya makala | 04 |
| Nyenzo ya mawasiliano | Cu alloy |
| Urefu wa kukatwa | 7 mm |
| Mbinu ya muunganisho | Screw connection with tension sleeve |
| Kukaza torque | 0.5 Nm ... 0.6 Nm |
| Aina ya kifungashio | packed in cardboard |
| Mkondo wa nominella IN | 24 A |
| Volti ya kawaida ya Umoja wa Mataifa | 400 V |
| Mchoro wa vipimo | |
| Nyenzo za kuhami joto | PA |
| Dokezo kwenye programu | For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). |
| Idadi ya nafasi | 2 |
| Idadi ya uwezo | 2 |
| Volti iliyokadiriwa (II/2) | 630 V |
| Kichwa cha skrubu cha umbo la gari | Slotted (L) |
| Sehemu ya msalaba ya nominella | 2.5 mm² |
| Idadi ya miunganisho | 2 |
| Volti iliyokadiriwa (III/2) | 400 V |
| Volti iliyokadiriwa (III/3) | 250 V |
| Urefu wa pini ya solder [P] | 5 mm |
| Sifa za uso | Tin-plated |
| Kikundi cha nyenzo za kuhami joto | I |
| Pini za solder kwa kila uwezo | 1 |
| CTI kulingana na IEC 60112 | 600 |
| Volti ya kuongezeka iliyokadiriwa (II/2) | 4 kV |
| Sehemu ya msalaba ya kondakta AWG | 24 ... 12 |
| Volti ya kuongezeka iliyokadiriwa (III/2) | 4 kV |
| Volti ya kuongezeka iliyokadiriwa (III/3) | 4 kV |
| Sehemu ngumu ya kondakta | 0.2 mm² ... 4 mm² |
| Halijoto ya kawaida (mkusanyiko) | -5 °C ... 100 °C |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Volti ya insulation iliyokadiriwa (II/2) | 630 V |
| Sehemu ya msalaba ya kondakta inayonyumbulika | 0.2 mm² ... 2.5 mm² |
| Volti ya insulation iliyokadiriwa (III/2) | 400 V |
| Volti ya insulation iliyokadiriwa (III/3) | 250 V |
| umbali wa chini kabisa wa kuteleza (II/2) | 3.2 mm |
| umbali wa chini kabisa (III/2) | 3 mm |
| umbali wa chini kabisa (III/3) | 3.2 mm |
| Unyevu wa jamaa (uhifadhi/usafiri) | 30 % ... 70 % |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 70 °C |
| Faharasa ya ufuatiliaji linganishi (IEC 60112) | CTI 600 |
| Eneo la kusugulia uso wa chuma (safu ya juu) | Tin (4 - 8 µm Sn) |
| Sehemu ya mwisho ya uso wa chuma (safu ya juu) | Tin (4 - 8 µm Sn) |
| Viendeshaji 2 vyenye sehemu sawa, imara | 0.2 mm² ... 2.5 mm² |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika | 0.2 mm² ... 1.5 mm² |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (II/2) | 3 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/2) | 3 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/3) | 3 mm |
| Kielelezo cha kuwaka kwa waya wa mwanga GWFI kulingana na EN 60695-2-12 | 850 |
| Joto la kuwasha la waya yenye mwanga GWIT kulingana na EN 60695-2-13 | 775 |
| Halijoto kwa ajili ya jaribio la shinikizo la mpira kulingana na EN 60695-10-2 | 125 °C |
| Sehemu ya msalaba ya kondakta, inayonyumbulika, yenye kipete, na kifuniko cha plastiki | 0.25 mm² ... 1.5 mm² |
| Sehemu ya msalaba ya kondakta inayonyumbulika, yenye kipete bila kifuniko cha plastiki | 0.25 mm² ... 2.5 mm² |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika, vyenye kipete bila sleeve ya plastiki | 0.25 mm² ... 0.75 mm² |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika, vyenye kipete TWIN chenye kifuniko cha plastiki | 0.5 mm² ... 1.5 mm² |
Maelezo ya Bidhaa
Terminal block for printed circuit board, nominal current: 24 A, nominal voltage (III/2): 400 V, nominal section: 2.5 mm², number of potentials: 2, number of rows: 1, number of poles per row: 2, artic
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
