Kipatikana Bidhaa Maarufu
MINI MCR-SL-RPS-I-I
MINI MCR-SL-RPS-I-I 2864422 PHOENIX CONTACT Repeater power supply
$0.00USD
4053 kwenye hisa
Vipimo Muhimu
:208 mW (24 V DC)
EMC:A
Dokezo:When being exposed to interference, there may be minimal deviations.
Rangi:green (RAL 6021)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| 208 mW (24 V DC) | |
| EMC | A |
| Dokezo | When being exposed to interference, there may be minimal deviations. |
| Rangi | green (RAL 6021) |
| Kina | 101.2 mm |
| Upana | 6.2 mm |
| Urefu | ≤ 2000 m |
| Ripple | < 20 mVrms(at 500 Ω) |
| Maoni | Safety measures must be taken to prevent electrostatic discharge. |
| Dokezo la EMC | EMC: class A product, see manufacturer's declaration in the download area |
| Unyevu | B |
| Ufungashaji | Required protection according to the Rules shall be provided upon installation on board |
| Mtetemo | B |
| Insulation | Basic insulation in accordance with IEC/EN 61010 |
| Cheti | CE-compliant |
| Uteuzi | Electromagnetic RF field |
| Halijoto | B |
| Aina ya bidhaa | Repeater power supply |
| Uzi wa skrubu | M3 |
| Volti ya majaribio | 1.5 kV AC (50 Hz, 60 s) |
| Dokezo la mkutano | The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715. |
| Aina ya kupachika | DIN rail mounting |
| Utambulisho | UL 508 Recognized |
| Utoaji wa kelele | EN 61000-6-4 |
| Kinga ya kelele | EN 61000-6-2 |
| Familia ya bidhaa | MINI Analog |
| Idadi ya njia | 1 |
| Marekebisho ya makala | 16 |
| Nyenzo za makazi | PBT |
| Volti isiyo na mzigo | approx. 12.5 V |
| Idadi ya pembejeo | 1 |
| Kiwango cha uchafuzi wa mazingira | 2 |
| Urefu wa kukatwa | 12 mm |
| Mbinu ya muunganisho | Screw connection |
| Nafasi ya kupachika | any |
| Idadi ya matokeo | 1 |
| Matumizi ya nguvu | < 900 mW (at 24 V DC and in repeater power supply operation) |
| Mzunguko wa kinga | Transient protection |
| Mchoro wa vipimo | |
| Ishara ya sasa ya kuingiza data | 0 mA ... 20 mA (isolator operation) |
| Kiwango cha ulinzi | IP20 |
| Kutengwa kwa umeme | 3-way isolation |
| Kategoria ya volteji nyingi | II |
| Kiwango cha voltage ya usambazaji | 19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Ishara ya sasa ya kutoa | 0 mA ... 20 mA (isolator operation) |
| Viwango/kanuni | EN 61000-4-2 |
| Masafa ya kikomo (3 dB) | approx. 100 Hz |
| Volti ya usambazaji wa kawaida | 24 V DC |
| Jibu la hatua (10-90%) | 3.5 ms |
| Maelezo ya ingizo | Sensor circuit |
| Volti ya insulation iliyokadiriwa | 50 V AC/DC |
| Ishara ya ingizo la sasa ya juu zaidi | 28 mA |
| Ishara ya juu zaidi ya kutoa umeme wa sasa | 28 mA |
| Hitilafu ya juu zaidi ya uwasilishaji | ≤ 0.2 % (of final value) |
| Volti ya usambazaji wa kipitisha | UB- max. 4.5 V for load 0 mA ... 20 mA |
| Sehemu ya msalaba ya kondakta AWG | 26 ... 12 |
| Hitilafu ya upitishaji, kawaida | ≤ 0.1 % (of final value) |
| Tabia ya upitishaji wa mawimbi | In = Out |
| Sehemu ngumu ya kondakta | 0.2 mm² ... 2.5 mm² |
| Utangamano wa sumakuumeme | Conformance with EMC directive |
| Ingizo la sasa la upinzani wa pembejeo | approx. 50 Ω |
| Halijoto ya mazingira (uendeshaji) | -20 °C ... 60 °C |
| Pato la sasa la mzigo/matokeo | ≤ 500 Ω (I = 20 mA) |
| Kiwango cha juu cha mgawo wa joto | < 0.01 %/K |
| Sehemu ya msalaba ya kondakta inayonyumbulika | 0.2 mm² ... 2.5 mm² |
| Unyevu unaoruhusiwa (uendeshaji) | 5 % ... 95 % (non-condensing) |
| Mgawo wa halijoto, wa kawaida | < 0.002 %/K |
| Aina ya voltage ya usambazaji wa kisambazaji | 14.7 V DC ... 25.5 V DC |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 85 °C |
| Kutenganisha umeme kati ya pembejeo na matokeo | yes |
| Usambazaji wa nguvu wa kiwango cha juu kwa hali ya kawaida | 508 mW (24 V DC) |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Ulinzi wa moto kwa magari ya reli (DIN EN 45545-2) R24 | HL 1 - HL 2 |
| Mkengeuko wa kawaida kutoka kwa thamani ya mwisho ya masafa ya kupimia | 10 % |
Maelezo ya Bidhaa
MCR feeder separator, with screw connection, input signal: (0)4..20 mA, output signal: (0)4..20 mA
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
