Kipatikana Bidhaa Maarufu
MINI MCR-2-UI-UI
MINI MCR-2-UI-UI 2902037 PHOENIX CONTACT 3-way signal conditioner with plug-in connection technology and cal..
$0.00USD
3914 kwenye hisa
Vipimo Muhimu
:1 V ... 5 V (via DIP switch)
ATEX:Ex II 3 G Ex nA IIC T4 Gc X
Rangi:gray
Kina:120.5 mm
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| 1 V ... 5 V (via DIP switch) | |
| ATEX | Ex II 3 G Ex nA IIC T4 Gc X |
| Rangi | gray |
| Kina | 120.5 mm |
| Upana | 6.2 mm |
| Urefu | 110.5 mm |
| Uzingatiaji | CE-compliant |
| Uteuzi | Electromagnetic RF field |
| Uzi wa skrubu | M3 |
| Utoaji wa kelele | EN 61000-6-4 |
| Kinga ya kelele | EN 61000-6-2 When being exposed to interference, there may be minimal deviations. |
| Idadi ya njia | 1 |
| Nyenzo za makazi | PBT |
| Idadi ya pembejeo | 1 |
| Kiwango cha uchafuzi wa mazingira | 2 |
| Urefu wa kukatwa | 10 mm |
| UL, Marekani / Kanada | UL 508 Listed |
| Mbinu ya muunganisho | Screw connection |
| Nafasi ya kupachika | any |
| Idadi ya matokeo | 1 |
| Matumizi ya nguvu | ≤ 800 mW (at IOUT= 20 mA, 9.6 V DC, 600 Ω load) |
| Mkondo wa pembejeo wa juu zaidi | 24 mA |
| Volti ya juu zaidi ya kuingiza | 33 V |
| Mzunguko wa kinga | Transient protection |
| Kiwango cha juu cha sasa cha kutoa | 22 mA |
| Ishara ya sasa ya kuingiza data | 0 mA ... 20 mA (via DIP switch) |
| Kiwango cha ulinzi | IP20 |
| Kutengwa kwa umeme | Reinforced insulation in accordance with IEC 61010-1 |
| Kategoria ya volteji nyingi | II |
| Kiwango cha voltage ya usambazaji | 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Ishara ya kuingiza volteji | 0 V ... 5 V (via DIP switch) |
| Maagizo ya kusanyiko | The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. |
| Ishara ya sasa ya kutoa | 0 mA ... 20 mA (via DIP switch) |
| Mkondo wa mzunguko mfupi | < 32 mA |
| Viwango/kanuni | EN 61000-4-3 |
| Ishara ya kutoa volteji | 0 V ... 5 V (via DIP switch) |
| Masafa ya kikomo (3 dB) | 30 Hz (via DIP switch) |
| Volti ya usambazaji wa kawaida | 24 V DC |
| Jibu la hatua (10-90%) | < 8.5 ms (with 30 Hz filter) |
| Volti ya insulation iliyokadiriwa | 300 V (effective) |
| Inaweza kusanidiwa/kupangwa | Yes |
| Hitilafu ya juu zaidi ya uwasilishaji | ≤ 0.1 % (of final value) |
| Matumizi ya kawaida ya sasa | 25 mA (Current output, at 24 V DC incl. load) |
| Cheti cha uainishaji | DNV GL 14445-15HH |
| Utangamano wa sumakuumeme | Conformance with EMC Directive 2004/108/EC |
| Ingizo la sasa la upinzani wa pembejeo | approx. 63 Ω |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 70 °C |
| Pato la sasa la mzigo/matokeo | ≤ 600 Ω (at 20 mA) |
| Pato la volteji ya mzigo/matokeo | ≥ 10 kΩ |
| Kiwango cha juu cha mgawo wa joto | 0.01 %/K |
| Upinzani wa pembejeo ya voltage | > 1000 kΩ |
| Jaribio la voltage, ingizo/matokeo/ugavi | 3 kV (50 Hz, 1 min.) |
| Sehemu ya msalaba ya kondakta inayonyumbulika kwa kiwango cha juu. | 1.5 mm² |
| Sehemu ya msalaba ya kondakta inabadilika kwa kiwango cha chini. | 0.2 mm² |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 85 °C |
| Sehemu ya juu zaidi ya kondakta wa AWG, inayonyumbulika | 12 |
| Sehemu ya chini ya kondakta wa AWG, inayonyumbulika | 24 |
| Kondakta/kituo kimoja, imara, chenye kipete, kiwango cha juu zaidi. | 1.5 mm² |
| Kondakta/kituo kimoja, imara, chenye kipete, kiwango cha chini. | 0.2 mm² |
| Kondakta/kituo kimoja, imara, bila feri, upeo. | 2.5 mm² |
| Kondakta/kituo kimoja, imara, bila kipete, kiwango cha chini. | 0.2 mm² |
Maelezo ya Bidhaa
3-way separation amplifier with plug-in connection technology and calibrated measurement range change for galvanic separation of single-pole and bipolar analogue signals. Input/output configurable via
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
The 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover can be configured using DIP switches and is used for the electrical isolation, conversion, amplification, and filtering of unipolar and bipolar standard and normalized signals. On the input side, the standard analog signals 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V or -10 ... 10 V, and signals2 ... 10 V, 0 ... 20 V, 4 ... 20 V, 0 ... 24 V, 0 ... 30 V, -5 ... 5 V, -20 ... 20 V, -24 ... 24 V, -30 ... 30 V and -20 ... 20 mA are available. On the output side, 0 ... 20 mA, 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V, 1 ... 5 V, -10 ... 10 V and -5 ... 5 V are possible. There is no need for adjustment following a measuring range changeover. The measuring transducer supports fault monitoring and NFC communication.
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
