


| Kipengele | Thamani |
|---|---|
| Bidhaa | Brushless Motors |
| Shimoni | Pinion shaft |
| Mfululizo | MBMU |
| Vipengele | Position control type.50 W・90 W・130 W, Input power supply for Amplifier: Voltage AC 100 V/200 V, Rated speed 3000 r/min |
| Muhuri wa mafuta | without |
| Uzito (kg) | 0.7 |
| Nambari ya Sehemu | MBMU5AZAB |
| Jina la bidhaa | MINAS-BL GP Series |
| Matokeo yaliyokadiriwa | 50 W |
| Darasa la ulinzi | IP65 |
| –Kuhusu Uzio | Excluding the shaft pass-through section and cable end connector.These motors conform to the test conditions specified in EN standards (EN60529, EN60034-5).Do not use these motors in application where water proof performance is required such as continuous wash-down operation. |
| Kipimo cha mraba cha flange | 80 mm sq. |
| Darasa la insulation ya injini | 130(B) |
| Torque iliyokadiriwa (N ⋅ m) | 0.16 |
| Vipimo vya volteji | 100 V/200 V common |
| Kiwango cha kudhibiti kasi (r/min) | 30 to 4000* Adjustment of the parameters is necessary depending on the workload conditions. |
| Kasi ya mzunguko iliyokadiriwa (r/min) | 3000 |
| -Kasi ya mzunguko iliyokadiriwa kuhusu | Motor shaft speed: to be multiplied by the reduction ratio when the gear head is used. |
| Wakati wa hali ya kutofanya kazi kwa rotor (x10-4kg ⋅ m²) | 0.12 |
| Toka ya kuanzia (Thamani ya uwakilishi) (N ⋅ m) | 0.24 |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji