


| Kipengele | Thamani |
|---|---|
| Jina | IDPC-65A-1400 |
| Jimbo | New |
| Muundo | Open Format |
| Mfululizo | IDPC-65A |
| Kufifia | 0-10V, 1-10V, PWM Signal 10V |
| Idhini | CCC, CE, ENEC, UL |
| Nguvu (W) | 64,40 |
| Upana (mm) | 67.50 |
| Urefu (mm) | 20.50 |
| Kiwango cha juu cha kuingiza AC | 295,00 |
| Kiwango cha chini cha kuingiza AC | 180,00 |
| Maombi | Lighting |
| Mtengenezaji | MEAN WELL |
| Aina ya bidhaa | LED Driver |
| Kutengwa (V) | 3.750,00 |
| Nguvu ya Kilele (W) | 64.4 |
| Kiunganishi cha kuingiza data | Quick Connector |
| Masafa ya kuingiza | 50 Hz, 60 Hz |
| Muda Mrefu/Usuli | 130.00 |
| Maelezo Marefu | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Open format typePCBS.Input range180-295Vca47-63Hz.Output in constant current1400mA.Range of output voltage with current mode constant34 to 46Vccaccording to demand load.Power:Of 64.4 W.Efficiency typical:86%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the outputInput class II without grounding.Factor corrector, power>0.95to 230vac at full load.OutputAuxiliary 12V/50mA.Consumption without load <1,2 W.Operating temperature range of caseTcfrom-20ºCup+40ºC.Dimensions (Length x Width x Height):130 x 67,5 x 20.5 mm.3 years of warranty.Manufacturer: MEAN WELL.The series IDPC are LED drivers designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. The A version has an outputauxiliaryof12V/50mA.With an open format PCB type designed for lighting applications in interior. Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series IDPV.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Kiunganishi cha kutoa | Quick Connector |
| Aina ya Kiingilio CA | Single-phase |
| Dhamana (Miaka) | 3,00 |
| Nchi ya Asili | China |
| Mkondo wa kutoa mA | One thousand four hundred |
| Kiwango cha Chini cha Pato (mA) | 1.400,00 |
| Kiwango cha Upeo wa Pato (mA) | 1.400,00 |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji