Kipatikana Bidhaa Maarufu
HSCH 2,5-3U-TT22TT 9005
HSCH 2,5-3U-TT22TT 9005 1548074 PHOENIX CONTACT PCB base housing, nominal cross-section: 2.5 mm², nominal cu..
$4.00USD
2540 kwenye hisa
Vipimo Muhimu
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Dokezo:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Lami:5 mm
Matokeo:Test passed
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Dokezo | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Lami | 5 mm |
| Matokeo | Test passed |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Masafa | 10 - 150 - 10 Hz |
| Upana [w] | 17.45 mm |
| Urefu [h] | 32.9 mm |
| Urefu [l] | 16 mm |
| Mpangilio wa pini | Linear pinning |
| Nafasi ya kubandika | 5.30 mm |
| Dokezo la usalama | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Kasi ya kufagia | 1 octave/min |
| Aina ya bidhaa | PCB headers |
| Kipenyo cha shimo | 1.3 mm |
| Aina ya kupachika | Wave soldering |
| Idadi ya mizunguko | 25 |
| Vipimo | IEC 60512-1-1:2002-02 |
| Idadi ya safu mlalo | 2 |
| Vipimo vya pini | 0.8 x 0.8 mm |
| Familia ya bidhaa | HSCH 2,5/..-G |
| Mkazo wa joto | 100 °C/168 h |
| Rangi (Nyumba) | black (9005) |
| Flange ya kupachika | without |
| Nyenzo ya mawasiliano | Cu alloy |
| Mkazo unaosababisha kutu | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Mbinu ya muunganisho | Plug / solder connection |
| Aina ya kifungashio | packed in cardboard |
| Upinzani wa mguso | 2 mΩ |
| Mkondo wa nominella IN | 8 A |
| Volti ya kawaida ya Umoja wa Mataifa | 320 V |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Mchoro wa vipimo | |
| Nyenzo za kuhami joto | PA |
| Idadi ya nafasi | 8 |
| Aina ya kifungashio cha nje | Carton |
| Volti iliyokadiriwa (II/2) | 600 V |
| Maagizo ya mkutano: | Refer to the data sheet for the range in the download area. |
| Upinzani wa mguso R1 | 2 mΩ |
| Upinzani wa mguso R2 | 2.2 mΩ |
| Volti iliyokadiriwa (III/2) | 320 V |
| Volti iliyokadiriwa (III/3) | 250 V |
| Urefu wa pini ya solder [P] | 3.8 mm |
| Muda wa jaribio kwa kila mhimili | 2.5 h |
| Sifa za uso | Tin-plated |
| Kikundi cha nyenzo za kuhami joto | I |
| Pini za solder kwa kila uwezo | 1 |
| CTI kulingana na IEC 60112 | 600 |
| Volti ya kuongezeka iliyokadiriwa (II/2) | 4 kV |
| Idadi ya nafasi zilizojaribiwa | 4 |
| Mizunguko ya kuingiza/kutoa | 25 |
| Volti ya kuongezeka iliyokadiriwa (III/2) | 4 kV |
| Volti ya kuongezeka iliyokadiriwa (III/3) | 4 kV |
| Halijoto ya kawaida (mkusanyiko) | -5 °C ... 100 °C |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 105 °C (dependent on the derating curve) |
| Volti ya insulation iliyokadiriwa (II/2) | 600 V |
| Volti ya insulation iliyokadiriwa (III/2) | 320 V |
| Volti ya insulation iliyokadiriwa (III/3) | 250 V |
| umbali wa chini kabisa wa kuteleza (II/2) | 3.2 mm |
| Volti inayostahimili masafa ya nguvu | 2.2 kV |
| umbali wa chini kabisa (III/2) | 3 mm |
| umbali wa chini kabisa (III/3) | 3.2 mm |
| Punguza nguvu kwa kila pos. takriban. | 4 N |
| Nguvu ya kuingiza kwa kila nafasi ni takriban. | 5 N |
| Unyevu wa jamaa (uhifadhi/usafiri) | 30 % ... 70 % |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Msukumo hustahimili volteji katika usawa wa bahari | 4.8 kV |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 55 °C |
| Faharasa ya ufuatiliaji linganishi (IEC 60112) | CTI 600 |
| Eneo la kusugulia uso wa chuma (safu ya juu) | Tin (4 - 8 µm Sn) |
| Kishikilia mguso katika kiingilio Mahitaji >20 N | Test passed |
| Upinzani wa insulation, nafasi za jirani | > 15 TΩ |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (II/2) | 3 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/2) | 3 mm |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/3) | 3 mm |
| Kielelezo cha kuwaka kwa waya wa mwanga GWFI kulingana na EN 60695-2-12 | 850 |
| Joto la kuwasha la waya yenye mwanga GWIT kulingana na EN 60695-2-13 | 775 |
| Halijoto kwa ajili ya jaribio la shinikizo la mpira kulingana na EN 60695-10-2 | 125 °C |
Maelezo ya Bidhaa
PCB headers, nominal cross section: 2.5 mm2, nominal current: 8 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Pin, number of rows: 2, number of positions: 8, product
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
