


| Kipengele | Thamani |
|---|---|
| Jina | HLP-80H-12 |
| Jimbo | Recommended Model |
| Muundo | Open Format |
| Mfululizo | HLP-80H |
| Kufifia | 1-10V, Resistance 0-100K, PWM Signal 10V |
| Idhini | CCC, CE, UL |
| Nguvu (W) | 60,00 |
| Upana (mm) | 53.00 |
| Urefu (mm) | 29.50 |
| Kiwango cha juu cha kuingiza AC | 305,00 |
| Kiwango cha chini cha kuingiza AC | 90,00 |
| Maombi | Lighting |
| Mtengenezaji | MEAN WELL |
| Aina ya bidhaa | LED Driver |
| Kutengwa (V) | 3.750,00 |
| Volti ya kutoa | 12,00 |
| Nguvu ya Kilele (W) | Sixty |
| Kiunganishi cha kuingiza data | Plug-in |
| Masafa ya kuingiza | 50 Hz, 60 Hz |
| Muda Mrefu/Usuli | 167.00 |
| Maelezo Marefu | LED driver.Specially designed to feed LED strips.Open format typePCBS.Input range90-305Vca47-63Hz.Output voltage12vdc.Adjustable by external potentiometer (10,8-13,5 Vcc).Output intensity5A. Range of output current 0-5A according to demand load.Maximum output current adjustable through external potentiometer (4-5A).Power:60W.Efficiency typical:87,5%.Potentiometers:This model incorporates 2 external potentiometers that allow us to regulate the output voltage and the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,96to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):167 x 53 x 29.5 mm3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with LED strips or LED bulbs, which are fed at constant voltage. Working mode constant voltage giving a fixed voltage of 12V if the load is powered at constant voltage and does not overcome the maximum output power. The output voltage and the output current can be adjusted byexternal potentiometerslocated in the plate of the source, in addition to having regulation 0-10V/1-10V, 10V PWM, or resistance.With format, open PCB type. The series HLP is intended for applications of LED lighting. Suitable for dry environments and interior. Burn test at 100% load.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Kiunganishi cha kutoa | Plug-in |
| Aina ya Kiingilio CA | Single-phase |
| Dhamana (Miaka) | 3,00 |
| Nchi ya Asili | China |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji