Kipatikana Bidhaa Maarufu
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00USD
3584 kwenye hisa
Vipimo Muhimu
Bidhaa:Ultra High-speed Laser Displacement Sensor [CCD Style]
Uzito:Net weight: 300 g approx.
Maelezo:Controller
Kifaa cha ziada:-
Taarifa za Msambazaji
PANASONIC
Bidhaa: 4316
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Bidhaa | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| Uzito | Net weight: 300 g approx. |
| Maelezo | Controller |
| Kifaa cha ziada | - |
| Nambari ya Sehemu | HL-C1C-M |
| Toa kengele | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Urefu wa kebo | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| Jina la bidhaa | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| Kiwango cha sampuli | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| Shikilia chaguo za kazi | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Nambari ya Bidhaa | HL-C1C-M |
| Volti ya usambazaji | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Vichujio vya kidijitali | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Viashiria: GIZA | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| Ingizo la ON limewekwa sifuri | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Urekebishaji: Urefu | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Ingizo la OFF lililowekwa na sifuri | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Urekebishaji: Shift | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Matumizi ya sasa | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| Viashiria: ANGAVU | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| Kazi za hesabu | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Ingizo/matokeo ya mfululizo | RS-232C |
| Kichwa cha kitambuzi cha kuunganisha | Maximum 2 sensor heads |
| Matokeo ya analogi: Ya sasa | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| Pato la analogi: Volti | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| Idadi ya wastani ya sampuli | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Matokeo ya hukumu (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Viashiria: Utoaji wa leza | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| Sifa za halijoto | plus or minus 0.01 % F.S./degrees |
| Ingizo la muda (Utoaji wa leza) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| Towe la kengele: Uendeshaji wa towe | Opened when the amount of light is excessive or insufficient. |
| Toa kengele: Ulinzi wa mzunguko mfupi | Incorporated |
| Upinzani wa mazingira: Unyevu wa mazingira | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Upinzani wa mazingira: Upinzani wa mshtuko | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| Matokeo ya hukumu (O1, O2): Uendeshaji wa matokeo | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| Upinzani wa mazingira: Joto la kawaida | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Upinzani wa mazingira: Upinzani wa mtetemo | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| Matokeo ya hukumu (O1, O2): Kategoria ya matumizi | DC-12 or DC-13 |
| Matokeo ya hukumu (O1, O2): Ulinzi wa mzunguko mfupi | Incorporated |
Maelezo ya Bidhaa
More details
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
