Kipatikana Bidhaa Maarufu
HDFK 10I-HV NZ.A5E00913053
HDFK 10I-HV NZ.A5E00913053 0717827 PHOENIX CONTACT PCB terminal block
$0.00USD
4427 kwenye hisa
Vipimo Muhimu
:• Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data.
Dokezo:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Lami:10.1 mm
Matokeo:Test passed
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| • Observe the technical data provided here and refer to the documents listed under “Downloads”. The download area contains important information, such as installation notes, technical drawings, and 3D data. | |
| Dokezo | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Lami | 10.1 mm |
| Matokeo | Test passed |
| Rangi () | () |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Masafa | 10 - 150 - 10 Hz |
| Dokezo la usalama | • Only electrically qualified personnel may install and operate the product.To recognize and prevent danger, the qualified personnel must be familiar with the basics of electrical engineering. |
| Kasi ya kufagia | 1 octave/min |
| Halijoto | 960 °C |
| Kuongeza kasi | 5g (60.1 Hz ... 150 Hz) |
| Aina ya bidhaa | Panel feed-through terminal block |
| Vipimo | IEC 60947-7-1:2009-04 |
| Familia ya bidhaa | HDFK 10-HV |
| Maelekezo ya majaribio | X-, Y- and Z-axis |
| Marekebisho ya makala | 01 |
| Mfumo wa kiunganishi | HDFK 10 |
| Nyenzo ya mawasiliano | Cu alloy |
| Urefu wa kukatwa | 10 mm |
| Muda wa kuambukizwa | 30 s |
| Mbinu ya muunganisho | Screw connection with tension sleeve |
| Kukaza torque | 1.5 Nm ... 1.8 Nm |
| Mkondo wa nominella IN | 57 A |
| Volti ya kawaida ya Umoja wa Mataifa | 1000 V |
| Mchoro wa vipimo | |
| Nyenzo za kuhami joto | PA |
| Idadi ya nafasi | 2 |
| Sehemu ya msalaba ya nominella | 10 mm² |
| Volti iliyokadiriwa (III/3) | 1000 V |
| Muda wa jaribio kwa kila mhimili | 2.5 h |
| Sifa za uso | tin-plated |
| Kikundi cha nyenzo za kuhami joto | I |
| Kipimo cha ndani cha silinda | B6 |
| CTI kulingana na IEC 60112 | 600 |
| Volti ya kuongezeka iliyokadiriwa (III/3) | 8 kV |
| Sehemu ngumu ya kondakta | 0.5 mm² ... 16 mm² |
| Halijoto ya kawaida (mkusanyiko) | -5 °C ... 100 °C |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Sehemu ya msalaba ya kondakta inayonyumbulika | 0.5 mm² ... 10 mm² |
| Volti ya insulation iliyokadiriwa (III/3) | 1000 V |
| Jaribio la kupanda kwa joto linalohitajika | Increase in temperature ≤ 45 K |
| umbali wa chini kabisa (III/3) | 12.5 mm |
| Unyevu wa jamaa (uhifadhi/usafiri) | 30 % ... 70 % |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 70 °C |
| Faharasa ya ufuatiliaji linganishi (IEC 60112) | CTI 600 |
| Viendeshaji 2 vyenye sehemu sawa, imara | 0.5 mm² ... 4 mm² |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika | 0.5 mm² ... 4 mm² |
| thamani ya chini kabisa ya kibali - uwanja usio na usawa (III/3) | 8 mm |
| Mwelekeo wa muunganisho wa kondakta hadi mwelekeo wa programu-jalizi | 0 ° |
| Kielelezo cha kuwaka kwa waya wa mwanga GWFI kulingana na EN 60695-2-12 | 850 |
| Joto la kuwasha la waya yenye mwanga GWIT kulingana na EN 60695-2-13 | 775 |
| Halijoto kwa ajili ya jaribio la shinikizo la mpira kulingana na EN 60695-10-2 | 125 °C |
| Sehemu ya msalaba ya kondakta, inayonyumbulika, yenye kipete, na kifuniko cha plastiki | 0.5 mm² ... 10 mm² |
| Sehemu ya msalaba ya kondakta inayonyumbulika, yenye kipete bila kifuniko cha plastiki | 0.5 mm² ... 10 mm² |
| Sehemu mtambuka ya kondakta/aina ya kondakta/sehemu ya nguvu ya mvuto/thamani halisi | 0.5 mm² / solid / > 20 N |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika, vyenye kipete bila sleeve ya plastiki | 0.5 mm² ... 2.5 mm² |
| Viendeshaji 2 vyenye sehemu sawa, vinavyonyumbulika, vyenye kipete TWIN chenye kifuniko cha plastiki | 0.5 mm² ... 6 mm² |
Maelezo ya Bidhaa
Borne grommets, connection type: Screw connection with traction capsule, Screw connection with traction capsule, number of poles: 2, charging current: 57 A, section: 0.5 mm² - 16 mm², conductor connec
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
