Kipatikana Bidhaa Maarufu
HC-M-02-MOD-ST
HC-M-02-MOD-ST 1679346 PHOENIX CONTACT HEAVYCON contact insert module, male, 2-pos., axial screw connection
$0.00USD
4329 kwenye hisa
Vipimo Muhimu
:Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
Upana:34.2 mm
Urefu:14.6 mm
Mfululizo:HC-M-02
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| Upana | 34.2 mm |
| Urefu | 14.6 mm |
| Mfululizo | HC-M-02 |
| Jumla | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| Maombi | Power |
| Aina ya bidhaa | Modular contact insert |
| Dokezo la mkutano | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| Imekadiriwa mkondo | 40 A |
| Nyenzo ya mawasiliano | Copper alloy |
| Soketi ya hexagonal | SW 2 |
| Nambari za mawasiliano | 1 - 2 |
| Kukaza torque | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Wasifu wa muunganisho | 2 |
| Kiwango cha uchafuzi wa mazingira | 3 |
| Mchoro wa vipimo | |
| Idadi ya nafasi | 2 |
| Volti ya kuongezeka iliyokadiriwa | 8 kV |
| Kategoria ya volteji nyingi | III |
| Teknolojia ya muunganisho | Axial screw connection |
| Volti iliyokadiriwa (III/3) | 1000 V |
| Idadi ya nafasi za moduli | 1 |
| Sehemu ya msalaba ya kondakta | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Nyenzo za mawasiliano | PC |
| Nyenzo ya uso wa mguso | Ag |
| Mizunguko ya kuingiza/kutoa | ≥ 500 |
| Sehemu ya muunganisho AWG | 12 ... 10 |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 125 °C |
| Muunganisho katika acc. na kiwango cha kawaida | IEC / EN |
| Ukadiriaji wa kuwaka kulingana na UL 94 | V0 |
| Urefu wa kukatwa kwa waya mmoja mmoja | 8 mm +1 mm (for 6 mm²) |
Maelezo ya Bidhaa
More details
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
