Kipatikana Bidhaa Maarufu
HC-M-02-AT-M-10
HC-M-02-AT-M-10 1417389 PHOENIX CONTACT Contact insert module
$0.00USD
4833 kwenye hisa
Vipimo Muhimu
GTIN:4055626112695
Ufunguo wa kuagiza:1417389
Ukurasa wa katalogi:Page 563 (C-2-2017)
Kitengo cha kufungasha:2 pc
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4055626112695 |
| Ufunguo wa kuagiza | 1417389 |
| Ukurasa wa katalogi | Page 563 (C-2-2017) |
| Kitengo cha kufungasha | 2 pc |
| Nchi ya asili | PL (Poland) |
| Nambari ya ushuru maalum | 85366990 |
| (Hali ya mazingira) | 2 Nm (6 -8 mm²) |
| Kiasi cha chini cha oda | 2 pc |
| Nyenzo za mawasiliano (Jumla) | Copper alloy |
| Mkondo uliokadiriwa (Vipimo) | 40 A |
| Upana (Data Muhimu ya Biashara) | 34.2 mm |
| (Viwango na Kanuni) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Urefu (Data Muhimu ya Kibiashara) | 14.6 mm |
| (Sifa za kiufundi) | The axial screw connection must be established using a 2 mm Allen key (for stranded conductors only) |
| Wasifu wa muunganisho (Vipimo) | 2 |
| Volti ya kuongezeka iliyokadiriwa (Vipimo) | 8 kV |
| Kumbuka (Sifa za kiufundi) | For HEAVYCON HC-B6 to B48 housing, snap-in module frame required, axial connection for 2 mm Allen key |
| Rangi (Sifa za kiufundi) | light gray |
| Nyenzo za mtoa huduma za mawasiliano (Jumla) | PC |
| Nyenzo ya uso wa mguso (Jumla) | Ag |
| Volti iliyokadiriwa (III/3) (Vipimo) | 1000 V |
| Mfululizo (Sifa za kiufundi) | HC-M-02 |
| Uzito kwa Kipande (bila kujumuisha upakiaji) | 26.150 g |
| Kipenyo cha mguso (Hali ya mazingira) | 4 mm |
| RoHS ya China (Viwango na Kanuni) | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Viwango na Kanuni) | Lead 7439-92-1 |
| Kukaza torque (Hali ya mazingira) | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Muunganisho (Sifa za kiufundi) | Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. |
| Aina ya mguso (Sifa za kiufundi) | turned |
| Sehemu ya msalaba ya kondakta (Hali ya mazingira) | 2.5 mm² ... 10 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Mbinu ya muunganisho (Sifa za kiufundi) | Axial screw connection |
| Kiwango cha uchafuzi (Sifa za kiufundi) | 3 |
| Mizunguko ya kuingiza/kutoa (Hali za mazingira) | ≥ 500 |
| Sehemu ya muunganisho AWG (Hali za mazingira) | 12 ... 10 |
| Kategoria ya overvoltage (Sifa za mitambo) | III |
| Maagizo ya uunganishaji (Sifa za kiufundi) | To ensure correct use, installation in housing with IP54 protection or better is required |
| Idadi ya nafasi za moduli (Sifa za kiufundi) | 1 |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Data ya nyenzo) | V0 |
| Halijoto ya mazingira (uendeshaji) (Sifa za umeme) | -40 °C ... 125 °C |
| Urefu wa kukatwa kwa waya mmoja mmoja (Hali ya mazingira) | 5 mm +1 (2.5 mm² ... 4 mm²) |
| Muunganisho katika acc. na kiwango (sifa za kiufundi) | IEC / EN |
| Ukadiriaji wa kuwaka kulingana na UL 94 (Sifa za kiufundi) | V0 |
Maelezo ya Bidhaa
Contact insert module, number of poles: 2, power contacts: 2, control contacts: 0, Male, Axial screw connection, 690 V, 40 A, 2.5 mm² ... 10 mm², Application: Power
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
