G89101127 CARLO GAVAZZI Selected parameters MODULE TYPE Sensor / Detector HOUSING Decentral POWER SUPPLY Bus..
$0.00USD
4107 kwenye hisa
Taarifa za Msambazaji
CARLO GAVAZZI
Bidhaa: 10094
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Maelezo ya Bidhaa
More details
Vipengele Muhimu
Ubora wa kiwango cha viwanda
Inaendana na RoHS
Imethibitishwa CE
Dhamana ya mwaka 1
Maelezo ya Kiufundi
PIR SensorType G 8910 1127Duline®FieldbusInstallationbus• Passive infrared detector (PIR)• Detects movement by e.g. a person• Indoor applications• Dupline® output• Operating distance: 10 m• Built-in transmission time: 12 s to 10 min• Operating angle: 90°• Walk test: LED indication• Switch for NO/NC, transmitting channel output• Channel coding by GAP 1605• Supplied by Dupline®Product Description Ordering KeyG 8910 1127Non-powered Dupline® pas- sive infrared detector with built-in transmitter. For de- tection of movement by e.g.a person. Used for burglar alarm, light control etc. Built- in timer for delay on operate and transmission time.Type: Dupline®TypeType SelectionSupply Ordering no.1 channelPIR detectorBy Dupline®G 8910 1127Supply SpecificationsPower supplySupplied by Dupline®Rated operational current < 2.6 mA with walktest on< 1.9 mA with walktest offInputSpecificationsInputs PIR on I/O 1LensDual detecting zonesSegments 24Levels 3Angle90° Operating distance ≤ 10 m(see radiation diagram) Wave length7 to 14 µmInput detection speed 0.5 to 5 pulses/sTransmission delaySwitch 4 Delay on/off Delay on release 12 s to 10 min *) Switch 2 OFF 12 s to 2 min Switch 2 ON 1 to 10 minDefault channel statusSwitch 3 OFF NO Switch 3 ON NCOutputLED outputred LED on I/O 5Tamper signal on I/O 2*) The transmission time starts when the respective channel changes its status. The channel returns to its default status when the time has elapsed. Each detection by the PIR will retrigger the timer.General SpecificationsPower ON delayTyp. 1 min. It is therefore advisable to keep the unit connected to Dupline®Walk test indicationLED, red Switch 1 ON Walk test ON Switch 1 OFF Walk test OFFDelay time adjustment Potentiometer (Transm. timer) controls the range selected by switch 2EnvironmentDegree of protection IP 40For indoor applicationsOperating temperature-10° to +50°C (+14° to +122°F) Storage temperature -30° to +70°C (-22° to +158°F)ConnectionScrew terminals Terminal D+.Dupline signal Terminal D-Dupline signalMaterialHousing ColourWhiteLensPolyethyleneDimensions (WxHxD)104 x 55 x 57 mmWeightApprox. 150 gSpecifications are subject to change without notice (01.12.2006)1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group