G38001016800

Master Channel GeneratorTypes G 3800 0016, G 3800 1016Duline®FieldbusInstallationbus• Programmable channel generator• Automatic data exchange between multiple networked MasterGenerators, allowing systems with up to 4096 I/O points• Option for built-in GSM Modem for monitoring and control via SMS• User-friendly configuration via Windows 98/2000/NT/XPsoftware• Real-time, timer and logic functions• Analog set-point control and monitoring• Light and Rollerblind control functions• Alarm Monitoring• Option for Radio controlled clock for high real time accuracy• 2 x RS232 ports for configuration and Dupline data read/write• 1 x RS485 port for networking of up to 32 Master Generators• Modbus-RTU protocol• Built-in software driver for external radio modem• 4 digital inputs / 4 digital outputs on-board• H8-housing for DIN-rail mounting (EN50022)• AC or DC power supplyProduct DescriptionOrdering KeyG 3800 1016 230Programmable channel gene- rator with built-in dedicated intelligent functions for light and roller blind control, alarm monitoring and analog set- pointcontrol.In additionto that, there is realtime-, timer- and logic- functions. Pro- gramming is easily performed through Windows-based con- figurationsoftware.An optional built-in GSM modem can be used for monitoring and control of Dupline signals via SMS. Up to 32 Master generators can be networkedas slaves in a RS485 network using the Modbus protocol. The unit has 4 digital inputs and 4 digital outputs on- board,and itis possibleto create links to other Dupline networksvia external Radio Modem.The G3800X016 is different from the G3800X015 in that it has the capability to perform automatic data exchange with up to 32 other G3800X016’s in a RS485 net- work,enablingupto4096I/O-points in one system.Type: Dupline® H8-housing GSM phoneMaster channel generatorSupplyType SelectionSupplyOrdering no.Ordering no.w. GSM telephone115/230 VACG 3800 0016 230G 3800 1016 23010-30 VDCG 3800 0016 800G 3800 1016 800Input/Output SpecificationsSerial PortRS 232COM 1115 kBaudCOM 29600 Baud, adjustableData format 8 bitCOM 1, COM 2 No parity, 1 stop bit9-pole female SUB-D Pin assignmentTxDPin 2RxDPin 3GNDPin 5Dielectric voltageCom.port - Dupline®≥ 2 kVAC (rms) Protocol Modbus-RTURS 485 TerminationPin 27When in use, connect to pin 31Fs-BPin 28When in use, connect to pin 30Fs-APin 29When in use, connect to pin 31+ (B) Pin 30- (A) Pin 31Sequence time32 channels / 128 channels 38.6 ms / 132.3 msDigital outputs 4 PNP transistors FunctionProgrammable Output voltage VDD ≤ 35 VDCOutput current≤ 100 mA Output voltage drop ≤ 2 VOff-state leakage current≤ 100 µA Short-circuit protection None Built-in protective diodes None Dielectric voltageOutput - Dupline® ≥ 4 kVAC (rms) Output - Input 200 VInductive loads External noise suppression requiredInputsDigital 6 - 30 VDCVoltage ON > 5.5 V OFF < 1.5 V Current≤ 6 mADielectric voltage®GNDPin 32V+Pin 33*)Input - DuplineGSM Modem≥ 4 kVACProtocolModbus-RTUDupline® OutputDupline® carrierOutput voltage8.2 V Current< 130 mA Short-circuit protection YesSiemens cellular engine TC35Dual Band EGSM900 and GSM1800Output power Class 4 (2 W) EGSM900Class 1 (1 W) GSM1800Antenna connector FME*)V+ and GND may be used as supply for digital I/O’s, if RS 485 is not used.Specifications are subject to change without notice (01.09.2008) 1Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group