

| Kipengele | Thamani |
|---|---|
| 7 Nm (Support: EN 62444) | |
| Rangi | Brass color |
| Imehifadhiwa | yes |
| Maombi | EMC |
| Haina halojeni | no |
| Mtengenezaji | BIMED |
| Aina ya bidhaa | Cable screw gland |
| Thread pitch | 1.5 mm |
| Dokezo la mkutano | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| Kipenyo cha shimo | 16.1 mm ... 16.2 mm |
| Marekebisho ya makala | 00 |
| Kukaza torque | 7 Nm (Union nut) |
| Mchoro wa vipimo | |
| Kiwango cha ulinzi | IP68 (5 bar, 30 minutes) |
| Pete ya O-ring ya nyenzo ya kuziba | Perbunan |
| Ukubwa wa bisibisi, usaidizi | 20 mm |
| Ubunifu, Utulizaji wa Mkazo | A |
| Ukubwa wa bisibisi, nati ya muungano | 20 mm |
| Ukadiriaji wa eneo lililofungwa (NEMA) | 4X |
| Kipenyo cha kebo ya nje | 5 mm ... 10 mm |
| Aina ya athari ya mshtuko | 6 |
| Uteuzi wa Mtengenezaji | BMEM-E1 |
| Nyenzo ya kuziba Muhuri wa kebo | CR |
| Hexagon angular dimension | 22 mm |
| Pete ya kubana ya nyenzo | PA 6 |
| Thread type connection side | M16 x 1.5 |
| Nyenzo ya kuunganisha skrubu | Brass, nickel-plated |
| Utekelezaji wa unafuu wa mkazo | A |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 100 °C (static) |
| Length of the connecting thread | 7 mm |
| Cable diameter without cable sheath | 4 mm (Diameter of braided shield) |
| Aina ya kubana ya kipande cha kupunguza mkazo | 6.00 mm ... 10.00 mm (for UL 514 B) |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji