


| Kipengele | Thamani |
|---|---|
| Bidhaa | Integrated Display Type Digital Flow Sensor |
| Uzito | Net weight: 50 g approx., Gross weight: 115 g approx. |
| Maelezo | Resin body type |
| Onyesho | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| Nyenzo | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| Uwiano | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| Ukubwa wa lango | ø4 ø0.157 push-in |
| Ulinzi | IP40 (IEC) |
| Vifaa | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| Nambari ya Sehemu | FM-213-4 |
| Urefu wa kebo | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| Jina la bidhaa | Integrated Display Type Digital Flow Sensor FM-200 |
| Kurudia | Within ±1 % F.S. |
| Ingizo la nje | ON voltage: 0 to +0.4 VOFF voltage: +5 V to +V, or openInput time: 80 ms or more |
| Nambari ya Bidhaa | FM-213-4 |
| Volti ya usambazaji | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| Unyevu wa mazingira | 35 to 90 % RH, Storage: 35 to 90 % RH |
| Kioevu kinachotumika | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| Upinzani wa mshtuko | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Mbinu ya kuunganisha | Connector |
| Matokeo ya kulinganisha | NPN open-collector transistor・Maximum sink current: 50 mA or less・Applied voltage: 26.4 V DC or less (between comparative output and 0 V)・Residual voltage: 2.4 V or less (at 50 mA sink current) |
| Uchimbaji wa udongo uliofungwa | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| Halijoto ya mazingira | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| Matumizi ya sasa | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| Kiwango kamili cha mtiririko | 1,000 mℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| Kiwango cha shinikizo kilichokadiriwa | -0.09 to +0.7 MPa |
| Upinzani wa mtetemo | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| Pato la volteji ya analogi | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| Upinzani wa insulation | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Kiwango cha uhakikisho wa usahihi | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| Sifa za shinikizo | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| Ustahimilivu wa volteji | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| Ustahimilivu wa shinikizo | 1 MPa |
| Thamani iliyojumuishwa iliyoainishwa | 10 mℓ |
| Sifa za halijoto | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| Matokeo ya kulinganisha: Hysteresis | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| Utii wa maagizo ya kuashiria CE | EMC Directive, RoHS Directive |
| Matokeo linganishi: Hali za matokeo | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| Kiwango cha mtiririko wa papo hapo: Kiwango cha kuonyesha | -1,100 to +1,100 mℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Matokeo ya kulinganisha: Muda wa majibu | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| Kiwango cha mtiririko kilichounganishwa: Kiwango cha kuonyesha | ±9999999 mℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| Matokeo ya kulinganisha: Ulinzi wa mzunguko mfupi | Incorporated |
| Kiwango cha mtiririko wa papo hapo: Mpangilio na azimio la onyesho | 1 mℓ/min. |
| Kiwango cha mtiririko kilichounganishwa: Mpangilio na azimio la onyesho | 1 mℓ |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji