FAS01R 430831 GENERAL ELECTRIC FD/FE/FG-Aux.Contact NC right
$0.00USD
3025 kwenye hisa
Vipimo Muhimu
Hali:Active
TOZO 5.0 (VIWANGO):EC000041
TOZO 6.0 (VIWANGO):EC000041
Uzito (MAELEZO):0.0090 kg
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
Kipengele
Thamani
Hali
Active
TOZO 5.0 (VIWANGO)
EC000041
TOZO 6.0 (VIWANGO)
EC000041
Uzito (MAELEZO)
0.0090 kg
Masafa (HALI YA ODA/UTOAJI)
Internal accessories
Mfululizo (HALI YA AGIZO/UFIKIAJI)
Accessories
Aina ya Fremu (HALI YA AGIZO/UTOAJI)
D frame - E frame - G frame
Idadi ya nguzo (HALI YA ODA/UTOAJI)
3P / 4P
Maelezo ya Kiambatisho (HALI YA ODA/UTOAJI)
Contact-NC right Breaker + Drawout Position Indicator
Ufungashaji wa kawaida (HALI YA ODA/UFIKIAJI)
1
Aina ya Kifaa (HALI YA KUAGIZA/KUFIKIA)
Auxiliary Contacts
Maelezo ya Bidhaa
FAS01R
Vipengele Muhimu
Ubora wa kiwango cha viwanda
Inaendana na RoHS
Imethibitishwa CE
Dhamana ya mwaka 1
Maelezo ya Kiufundi
Auxiliary contactsAuxiliary contact blocks are conveniently fitted into an auxiliary-device compartment, accessible by removing the breaker cover. This fully insulated compartment has several pouches, a number of which are reserved for contact blocks. To allow for a logical and traceable schematics each contact block has a pre-defined position within the auxiliary device compartment indicated by a symbol printed both on the breaker case and on the auxiliary device itself. External wiring can be brought into the accessory compartment through - specifically designed and positioned - break-out openings in the breaker lid or can go through channels in the breaker rear. Once this is done the wiring can be stripped an easily connected to the box terminals on the internal accessories. These terminals are designed to connect wiring up to 2,5 mm².To identify the correct mounting position within the accessory compartment symbols are moulded into the breaker and contact housing. For auxiliary switches suited for mounting on the right and on the left. For Bell alarm switches; Mechanism operated types and Trip unit operated types.