Kipatikana Bidhaa Maarufu
EV-T2M3SE12-3AC32A-0,7M6,0E15
EV-T2M3SE12-3AC32A-0,7M6,0E15 1627785 PHOENIX CONTACT Infrastructure Socket Outlet for charging electric veh..
$0.00USD
3678 kwenye hisa
Vipimo Muhimu
GTIN:4055626379302
Ufunguo wa kuagiza:1627785
(Michoro):
Kitengo cha kufungasha:1
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| GTIN | 4055626379302 |
| Ufunguo wa kuagiza | 1627785 |
| (Michoro) | |
| Kitengo cha kufungasha | 1 |
| (Vipimo) | IP54 (with protective cover, see accessories) |
| Dokezo (Michoro) | Optimized insertion and withdrawal forces |
| Type (Drawings) | Rear protective cover screw connection |
| UNSPSC 11 (ETIM) | 39121522 |
| ETIM 3.0 (eCl@ss) | EC002061 |
| ETIM 4.0 (eCl@ss) | EC002061 |
| ETIM 5.0 (eCl@ss) | EC001321 |
| ETIM 6.0 (eCl@ss) | EC002898 |
| ETIM 7.0 (eCl@ss) | EC002898 |
| Nyenzo (Ubunifu) | Plastic |
| UNSPSC 13.2 (ETIM) | 39121522 |
| UNSPSC 18.0 (ETIM) | 39121522 |
| UNSPSC 19.0 (ETIM) | 39121522 |
| UNSPSC 20.0 (ETIM) | 39121522 |
| UNSPSC 21.0 (ETIM) | 39121522 |
| UNSPSC 6.01 (ETIM) | 30211923 |
| (Kiendeshaji cha kufunga) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| UNSPSC 12.01 (ETIM) | 39121522 |
| Nambari ya ushuru maalum | 85444290 |
| UNSPSC 7.0901 (ETIM) | 39121522 |
| (Ufafanuzi wa bidhaa) | 0.5 m (Locking actuator cables) |
| Mstari wa muundo (Ufungashaji) | Standard |
| Muda wa huduma (Kufunga) | > 10000 load cycles |
| Aina ya kufunga (Nyenzo) | Locking in the inserted state with a locking mechanism |
| Aina ya bidhaa (Michoro) | Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs |
| (Sifa za mitambo) | max. 10 mm (Front mounting, when using the locking mechanism) |
| Charging mode (Drawings) | Mode 3, Case B |
| Rangi ya nyumba (Kuweka) | black |
| Urefu wa kebo (Inafungwa) | 0.5 m |
| Kina (Ufafanuzi wa Bidhaa) | 76.2 mm |
| Volti ya kufunga (Nyenzo) | 12 V |
| Urefu wa juu zaidi (Vipimo) | 5000 m (above sea level) |
| Upana (Ufafanuzi wa Bidhaa) | 75 mm |
| Urefu (Ufafanuzi wa Bidhaa) | 96 mm |
| Charging standard (Drawings) | Type 2 |
| Ugunduzi wa kufunga (Nyenzo) | available |
| eCl@ss 4.0 (Uainishaji) | 27140800 |
| eCl@ss 4.1 (Uainishaji) | 27140800 |
| eCl@ss 5.0 (Uainishaji) | 27143400 |
| eCl@ss 5.1 (Uainishaji) | 27143400 |
| eCl@ss 6.0 (Uainishaji) | 27143400 |
| eCl@ss 7.0 (Uainishaji) | 27449001 |
| eCl@ss 8.0 (Uainishaji) | 27449001 |
| eCl@ss 9.0 (Uainishaji) | 27144706 |
| RoHS ya China (Kiendeshaji cha Kufunga) | Environmentally Friendly Use Period = 10; |
| REACh SVHC (Locking actuator) | |
| Tofauti za wateja (Kuweka) | On request |
| Viwango/kanuni (Michoro) | IEC 62196-2 |
| Kiwango cha ulinzi (Vipimo) | IP44 (plugged in) |
| Vipimo vya kuchimba (Ufafanuzi wa Bidhaa) | 60 mm x 60 mm |
| Muundo wa kebo (Ufafanuzi wa bidhaa) | 5x 6.0 mm² + 2x 0.5 mm² |
| Urefu wa kondakta (Ufafanuzi wa Bidhaa) | 0.7 m (AC cables) |
| Uso wa nyenzo wa mguso (Ubunifu) | Ag |
| Idadi ya awamu (Hali za mazingira) | 3 |
| Muda uliopendekezwa wa marekebisho (Kufunga) | 600 ms |
| Aina ya kondakta (Ufafanuzi wa bidhaa) | Single wires |
| Nguvu ya kuingiza (Sifa za umeme) | < 100 N (Optimized) |
| Kutolewa kwa dharura kwa mitambo (Nyenzo) | available |
| Note on the connection method (Drawings) | Crimp connection, cannot be disconnected |
| Nguvu ya uondoaji (Sifa za umeme) | < 100 N (Optimized) |
| Halijoto ya mazingira (uendeshaji) (Kufunga) | -30 °C ... 50 °C |
| Mkondo wa nyuma wa juu zaidi wa mota (Kufunga) | 1 A |
| Unene wa juu zaidi wa ukuta (Sifa za mitambo) | max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug) |
| Nguvu ya juu zaidi ya kuchaji (Hali ya mazingira) | 22 kW |
| Mkondo wa kawaida wa injini kwa ajili ya kufunga (Kufunga) | 0.2 A |
| Ugavi wa kawaida wa umeme kwenye mota (Kufunga) | 12 V |
| Halijoto ya mazingira (uendeshaji) (Vipimo) | -30 °C ... 50 °C |
| Idadi ya migusano ya umeme (Hali ya mazingira) | 5 (L1, L2, L3, N, PE) |
| Muda wa kusimamisha baada ya njia ya kuingia au kutoka (Inafungwa) | 3 s |
| Aina ya mkondo wa kuchaji (Hali ya mazingira) | AC 3-phase |
| Muda wa juu zaidi wa kukaa na mkondo wa nyuma (Kufunga) | 1000 ms |
| Kipenyo cha shimo la kupachika (Sifa za mitambo) | 7.00 mm (ø) |
| Idadi ya mawasiliano ya mawimbi (Hali za mazingira) | 2 (CP, PP) |
| Volti ya juu zaidi kwa ajili ya kugundua kufuli (Kufunga) | 30 V |
| Aina ya uwasilishaji wa mawimbi (Hali za mazingira) | Pulse width modulation |
| Dimensional drawingDimensional drawing (Drawings) | |
| Dokezo kuhusu njia ya muunganisho (Hali za mazingira) | Crimp connection, cannot be disconnected |
| Kiwango kinachowezekana cha usambazaji wa umeme kwenye mota (Kufunga) | 9 V ... 16 V |
| Mizunguko ya kuingiza/kutoa (Sifa za umeme) | > 10000 |
| Nafasi zinazowezekana za kupachika (Sifa za mitambo) | Rear panel mounting |
| Halijoto ya kawaida (uhifadhi/usafiri) (Vipimo) | -40 °C ... 80 °C |
| Mkondo wa umeme uliokadiriwa (Hali za mazingira) | 32 A |
| Volti iliyokadiriwa kwa mawasiliano ya nguvu (Hali za mazingira) | 480 V AC |
| Mkondo uliokadiriwa kwa mawasiliano ya mawimbi (Hali za mazingira) | 2 A |
| Volti iliyokadiriwa kwa mawasiliano ya mawimbi (Hali za mazingira) | 30 V AC |
| DiagramLocking states of the locking actuator (Drawings) | |
| Vizuizi vya nafasi ya kupachika (Sifa za mitambo) | Only 0 to 90 degree frontal inclination possible, see figure |
| Muunganisho wa skrubu wa kifuniko cha kinga (Sifa za mitambo) | only rear mounting possible |
| Schematic diagramDetection of the Infrastructure Plug (Drawings) | |
| Nafasi ya kupachika ya kiendeshaji cha kufunga (Sifa za mitambo) | Top center |
| Connection diagramPin assignment of Infrastructure Socket Outlet (Drawings) | |
| Schematic diagramPanel thickness for rear mounting (max. 50 mm, with Phoenix Contact protective cover, max. 22 mm) (Drawings) | |
| Schematic diagramFront mounting with rear protective cover screw connectionFront mounting is only possible when the locking actuator is removed. We recommend using an infrastructure socket outlet without pre-assembled locking actuator (EV-T2M3SE-...E0..., e.g., 1621729).The screw connection for a protective cover from the accessories range (EV-T2SC) only supports rear mounting. The panel thickness must not exceed 10 mm. The sealing frame that is slid on from the front must contact the housing panel flush with the flat side and must completely surround the infrastructure socket outlet. (Drawings) |
Maelezo ya Bidhaa
CHARX connect basic, Infrastructure socket, Rectangular, Optimized plug-and-take forces, for charging electric vehicles (EV) with alternating current (AC), Type 2, IEC62196-2, 32 A / 480 V (AC), Singl
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Maelezo ya Kiufundi
Connection diagramPin assignment of Infrastructure Socket Outlet
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
