

| Kipengele | Thamani |
|---|---|
| GTIN | 4055626958156 |
| Ufunguo wa kuagiza | 1101531 |
| (Michoro) | Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1). |
| (Nyenzo) | 2x 8.8 mm Return hoses |
| Kitengo cha kufungasha | 1 |
| (Vipimo) | IP20 (when not plugged in, the required IP24 degree of protection must be ensured by other means, e.g., by a holder, see accessories) |
| Dokezo (Michoro) | NOTE: Cable management may be required. |
| Type (Drawings) | Without panel feed-through |
| ETIM 6.0 (eCl@ss) | EC002897 |
| ETIM 7.0 (eCl@ss) | EC002897 |
| Coolant (Material) | 50 % water, 50 % glycol (recommended: Glysofor N) |
| Nambari ya ushuru maalum | 85444290 |
| (Hali ya mazingira) | 2x NTC (DC power wires inside) |
| (Vitambuzi vya halijoto) | 1050 W (Cable length: 6 m) |
| Aina ya kitambuzi (Kebo) | NTC |
| Aina ya bidhaa (Michoro) | HPC-DC charging cable with cooled vehicle connector, cooled cable |
| Darasa la waya (Nyenzo) | Class 6 |
| Charging mode (Drawings) | Mode 4 |
| Nyenzo za makazi (Ubunifu) | Plastic |
| Muundo wa kebo (Nyenzo) | 5 x 25 mm² + 7 x 0.75 mm² |
| Urefu wa juu zaidi (Vipimo) | 5000 m (above sea level) |
| Cable resistance (Material) | ≤ 0.00078 Ω/m (based on a power core, at an ambient temperature of 20°C) |
| Charging standard (Drawings) | CCS type 2 |
| Ukadiriaji wa kuwaka (Ubunifu) | V0 |
| Halijoto ya kuzima (Kebo) | 90 °C |
| Aina ya kondakta (Nyenzo) | straight |
| eCl@ss 9.0 (Uainishaji) | 27144705 |
| Cooling technology (Drawings) | Water-glycol mixture as coolant in the vehicle connector and in the cable |
| Lebo (Sifa za mitambo) | 8.9 mm x 28.9 mm (customer logo on request) |
| Eneo la kushughulikia nyenzo (Ubunifu) | Soft plastic |
| Uso wa kuoanisha nyenzo (Ubunifu) | Plastic |
| Flow rate (Temperature sensors) | 2 l/min |
| Cooling hose diameter (Material) | 1x 11.5 mm Supply hose |
| Viwango/kanuni (Michoro) | IEC 62196-3-1 |
| Kiwango cha ulinzi (Vipimo) | IP54 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
| Ala ya nje, rangi (Nyenzo) | black |
| Kipenyo cha chini kabisa cha kupinda (Nyenzo) | 535.5 mm (15 x diameter) |
| Ala ya nje, nyenzo (Nyenzo) | EVM-1 in accordance with EN 50620 |
| (Requirements for a cooling unit) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Kipenyo cha kebo ya nje (Nyenzo) | 35.7 mm ±0.4 mm |
| Mstari wa muundo (Sifa za mitambo) | HPC |
| Msimbo wa kipingamizi (Hali za mazingira) | 1500 Ω (between PE and PP) |
| Urefu wa kondakta (Ufafanuzi wa Bidhaa) | 5.5 m |
| Uso wa nyenzo wa mguso (Ubunifu) | Ag |
| Relief pressure (Temperature sensors) | 2.00 bar |
| Urefu wa kukatwa (Ufafanuzi wa Bidhaa) | 140 mm ±10 mm |
| Cooling capacity (Temperature sensors) | 600 W (Cable length: 3 m) |
| Flow temperature (Temperature sensors) | 10 °C |
| Nguvu ya kuingiza (Sifa za umeme) | < 100 N |
| Viwango/kanuni za waya (Nyenzo) | DIN EN 50620 |
| Operating pressure (Temperature sensors) | 1.00 bar ... 2.00 bar |
| Nguvu ya uondoaji (Sifa za umeme) | < 100 N |
| Eneo la mpini wa rangi (Sifa za mitambo) | black |
| Rangi ya uso wa kujamiiana (Sifa za kiufundi) | black |
| Nguvu ya juu zaidi ya kuchaji (Hali ya mazingira) | 500 kW |
| Ufuatiliaji wa halijoto (Hali ya mazingira) | 2x NTC (replaceable, front DC contacts) |
| Halijoto ya mazingira (uendeshaji) (Vipimo) | -30 °C ... 40 °C |
| China RoHS (Requirements for a cooling unit) | Environmentally Friendly Use Period = 10; |
| Kina cha kiunganishi cha gari (Ufafanuzi wa bidhaa) | 285.20 mm |
| Upana wa kiunganishi cha gari (Ufafanuzi wa bidhaa) | 72.00 mm |
| Communication interfaces (Ambient conditions) | CAN bus for reading the temperature and leakage sensor data |
| Idadi ya migusano ya umeme (Hali ya mazingira) | 3 (PE, DC+, DC-) |
| Urefu wa kiunganishi cha gari (Ufafanuzi wa bidhaa) | 181.20 mm |
| Idadi ya mawasiliano ya mawimbi (Hali za mazingira) | 2 (CP, PP) |
| Aina ya uwasilishaji wa mawimbi (Hali za mazingira) | Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121 |
| Maximum permissible pressure (Temperature sensors) | 4.00 bar |
| Dokezo kuhusu njia ya muunganisho (Hali za mazingira) | cannot be disconnected |
| Mizunguko ya kuingiza/kutoa (Sifa za umeme) | > 10000 |
| Halijoto ya kawaida (uhifadhi/usafiri) (Vipimo) | -40 °C ... 60 °C |
| Mkondo wa umeme uliokadiriwa (Hali za mazingira) | 500 A |
| Volti iliyokadiriwa kwa mawasiliano ya nguvu (Hali za mazingira) | 1000 V DC |
| Mkondo uliokadiriwa kwa mawasiliano ya mawimbi (Hali za mazingira) | 2 A |
| Volti iliyokadiriwa kwa mawasiliano ya mawimbi (Hali za mazingira) | 30 V AC |
| Schematic diagramPin assignment of the Vehicle Connector (Drawings) | |
| Schematic diagramCentral system: cooling unit and controller are positioned externally and supply multiple charging stations, each of which is equipped with a heat exchanger. The cooling is done actively using a chiller. (Drawings) | |
| Schematic diagramThe Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet. (Drawings) | |
| Dimensional drawingEnsure that the vehicle connector is placed in an appropriate resting position that ensures a minimum protection rating of IP24 in accordance with IEC 61851-1 for the entire time between charging. Use the dimensions of the vehicle connector to create this type of resting position. Detailed specifications can also be found in the download area. (Drawings) |
Speci za kiufundi na data ya utendaji
Mwongozo wa usakinishaji na uendeshaji