Kipatikana Bidhaa Maarufu
CHARX T1HBI12-DC200-3,0M1
CHARX T1HBI12-DC200-3,0M1 1436636 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for charg..
$0.00USD
3348 kwenye hisa
Vipimo Muhimu
:for installation in electric vehicles (EV)
Kina:117.6 mm
Upana:117.6 mm
Usimbaji:2.7 kΩ (between PE and CS)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| for installation in electric vehicles (EV) | |
| Kina | 117.6 mm |
| Upana | 117.6 mm |
| Usimbaji | 2.7 kΩ (between PE and CS) |
| Urefu | 4000 m (above sea level) |
| Nambari | 5 (L1, N, PE, DC+, DC-) |
| Jumla | A protective cap is supplied as standard for the DC contacts. |
| Aina ya kebo | Single wires |
| Teknolojia | Combined Charging System |
| Maombi | for charging with direct current (DC) |
| Kipimo cha mgawo | 3850 ppm/K |
| Aina ya vitambuzi | Pt 1000 |
| Urefu wa kebo | 3 m |
| Aina ya bidhaa | Vehicle charging inlet |
| Hali ya kuchaji | Mode 4 |
| Kurekebisha skrubu | M6 |
| Aina ya kupachika | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Imekadiriwa mkondo | 200 A DC |
| Volti iliyokadiriwa | 1000 V DC |
| Nguvu ya kuchaji | 200 kW |
| Familia ya bidhaa | CHARX connect universal |
| Muundo wa kebo | 2 x 70 mm² |
| Rangi (Nyumba) | black (9005) |
| Nguvu ya kuingiza | < 100 N |
| Sehemu ya kiambatisho | 2 sensors for the DC contacts |
| Upinzani wa kebo | ≤ 0.259 Ω/km |
| Mkondo wa kuchaji | 200 A |
| Utambuzi wa kufuli | available |
| Nguvu ya uondoaji | < 100 N |
| Kiwango cha kuchaji | CCS type 1 |
| AWG ya sehemu mtambuka | (converted acc. to IEC) |
| Volti ya uendeshaji | 12 V |
| Nyenzo (Nyumba) | Plastic |
| Waya moja, rangi | OG |
| Halijoto ya mazingira | -40 °C ... 130 °C |
| Rangi (Uso unaokaribiana) | black (9005) |
| Upinzani wa insulation | > 200 MΩ |
| Waya moja, nyenzo | Silicone |
| Viwango/kanuni | DIN EN 60751 |
| Kipenyo cha shimo la kupachika | 6.70 mm (ø) |
| Kipenyo cha kebo ya nje | 17.9 mm ±0.3 mm |
| Kipimo cha halijoto | DC contacts: 2x PT1000 (DIN EN 60751) |
| Kumbuka idadi ya nafasi | 4-pos. |
| Aina ya mkondo wa kuchaji | DC |
| Nyenzo (Uso wa mguso) | Silver |
| Mizunguko ya kuingiza/kutoa | > 10000 |
| Muda uliopendekezwa wa marekebisho | 600 ms |
| Aina ya uwasilishaji wa mawimbi | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Kutolewa kwa dharura kwa mitambo | available |
| Mkondo uliopendekezwa uliopimwa | ≤ 1 mA (Umax= 16 V DC) |
| Mkondo wa nyuma wa injini | max. 1.5 A |
| Kumbuka kuhusu njia ya muunganisho | Crimp connection, cannot be disconnected |
| Mizunguko ya uingizaji wa maisha ya huduma | > 10000 load cycles |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 80 °C |
| Nafasi ya kiendeshaji cha kufunga | top center |
| Mkondo wa kawaida wa injini kwa ajili ya kufunga | 0.25 A |
| Muda wa kusimama baada ya njia ya kuingia au kutoka | 3 s |
| Muda wa juu zaidi wa kukaa na mkondo wa nyuma | 1 s |
| Volti ya juu zaidi kwa ajili ya kugundua kufuli | 12 V |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 85 °C |
| Kiwango kinachowezekana cha usambazaji wa umeme kwenye injini | 9 V ... 16 V |
| Skurubu zilizojumuishwa katika wigo wa uwasilishaji | none |
| Kiwango cha ulinzi (Kiingilio cha kuchaji gari) | IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
Maelezo ya Bidhaa
CHARX connect, Vehicle inlet, for direct current (DC) charging, CCS type 1, IEC62196-2, IEC62196-3, 200 A / 1000 V (DC), length: 3 m (DC cables), locking actuator: 12 V, 4 poles, Front and rear wall m
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
