Kipatikana Bidhaa Maarufu
CHARX PS-M2/825DC/1000DC/30KW
CHARX PS-M2/825DC/1000DC/30KW 1296467 PHOENIX CONTACT CHARX power basic, Fast charging module for mounting D..
$0.00USD
3472 kwenye hisa
Vipimo Muhimu
:38 A (825 V DC)
Kina:550 mm
Upana:483 mm
imara:1.5 mm² ... 16 mm²
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| 38 A (825 V DC) | |
| Kina | 550 mm |
| Upana | 483 mm |
| imara | 1.5 mm² ... 16 mm² |
| Urefu | 134 mm |
| Kufunga | Locking clip |
| Kudharau | < 650 V DC ... 300 V DC (46 W/V) |
| Topolojia | Line (daisy-chain connection) |
| kunyumbulika | 1.5 mm² ... 16 mm² |
| Kiolesura | CAN bus |
| Kitengo cha raki | 3 U |
| Ufanisi | > 95 % (POut>50%) |
| Uteuzi | Input |
| IEC 60664-1 | II |
| Kiwango cha kelele | < 60 dB (1 m) |
| imara (AWG) | 15 ... 5 (Cu) |
| Feni ya ndani | yes |
| Aina ya bidhaa | DC power module |
| Maisha ya huduma | 40000 h (40 °C) |
| Ingizo la sasa | 48 A (650 V DC) |
| Aina ya kupachika | 19" rack mounting |
| Nguvu ya nominella | 30 kW |
| Mwelekeo wa mtiririko | from front to back |
| Utambulisho | DC IN: + / - / PE |
| Familia ya bidhaa | CHARX power basic |
| Kuchelewa kuwasha | < 8 s |
| Nyenzo za makazi | Zn-Al alloy |
| Urefu wa juu zaidi | ≤ 4000 m (Derating >2000 m: 10% / 1000 m) |
| Kiwango cha uchafuzi wa mazingira | 2 |
| Darasa la ulinzi | I |
| Urefu wa kukatwa | 18 mm (rigid/flexible) |
| Mbinu ya muunganisho | Push-in connection |
| Kupotoka kwa udhibiti | < 0.5 % (Voltage deviation static load change 20% ... 100%) |
| Teknolojia ya betri | Li-Ion |
| Tabia ya kupiga risasi kupita kiasi | ± 3 % (Switch-on procedure) |
| Kasi ya upitishaji | 125 kbps |
| Mchoro wa vipimo | |
| Kiwango cha volteji ya kuingiza | 300 V DC ... 825 V DC |
| Itifaki zinazoungwa mkono | CAN 2.0B |
| Urefu wa maambukizi | max. 20 m |
| Kiwango cha ulinzi | IP20 |
| Kutengwa kwa umeme | yes (primary/secondary) |
| Idadi ya violesura | 1 |
| Kiwango cha sasa cha matokeo | 0 A ... 100 A |
| Kiwango cha voltage ya kutoa | 30 V DC ... 1000 V DC |
| Uteuzi wa kawaida | Electric vehicle conductive charging system - Part 1: General requirements |
| Kipingamizi cha kukomesha | 120 Ω (Terminating the end device) |
| Fizikia ya uhamishaji | Twisted-Pair |
| Upinzani wa insulation | > 10 MΩ |
| Viwango/vipimo | IEC 61851-1 |
| Kizuizi cha mkondo wa kuingia | < 60 A |
| Kifaa cha kusubiri cha uondoaji wa umeme | < 14 W |
| MTBF (IEC 61709, SN 29500) | > 300000 h |
| Kiwango cha voltage ya kuingiza kwa majina | 650 V DC ... 825 V DC |
| Usanidi wa mfumo wa usambazaji | DC grid (DC±, PE) |
| Halijoto ya mazingira (uendeshaji) | -40 °C ... 70 °C |
| Ingizo/matokeo ya volteji ya insulation | 2121 V DC |
| Ulinzi wa halijoto kupita kiasi (OTP) | > 75 °C |
| Unyevu unaoruhusiwa (uendeshaji) | ≤ 95 % (non-condensing) |
| Mahitaji ya EMC kwa ajili ya utoaji wa kelele | EN 61000-6-3 |
| Mahitaji ya EMC kwa kinga ya kelele | EN 61000-6-1 |
| Halijoto ya kawaida (uhifadhi/usafiri) | -40 °C ... 70 °C |
| Ingizo la voltage ya insulation, pato / makazi | 2121 V DC |
| Idadi ya moduli za umeme kama vifaa vya basi vya CAN | max. 48 (within one CHARX control controller) |
| Kutenganisha umeme kati ya pembejeo na matokeo | yes |
| Ishara ya volteji ya insulation, mawasiliano/nyumba | 707 V DC |
| Ulinzi dhidi ya volteji kupita kiasi kwenye pato (OVP) | > 1040 V DC |
| Ingizo la volteji ya insulation, pato/ishara, mawasiliano | 4242 V DC |
Maelezo ya Bidhaa
CHARX power basic, Fast charging module for setting up DC charging stations, 19" rack mounting, CAN bus, output: 30 V DC...1000 V DC / 0 A...100 A
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
