Kipatikana Bidhaa Maarufu
CCV 2,5/ 6-GF-5,08 GYP26THRR56
CCV 2,5/ 6-GF-5,08 GYP26THRR56 1845438 PHOENIX CONTACT Housing base printed circuit board, nominal current: ..
$0.00USD
3043 kwenye hisa
Vipimo Muhimu
Hatua:5.08 mm
Matokeo:Approved Test
Mchakato:Reflow/Wave Soldering
Upeo:0.35 mm (10 Hz ... 60.1 Hz)
Taarifa za Msambazaji
Bidhaa: 0
Kwa kawaida husafirisha ndani ya siku 2-3 za kazi
Ubora Umeheshimiwa
Usafirishaji wa haraka
Msaada wa Kiufundi
Speci ya Kiufundi
| Kipengele | Thamani |
|---|---|
| Hatua | 5.08 mm |
| Matokeo | Approved Test |
| Mchakato | Reflow/Wave Soldering |
| Upeo | 0.35 mm (10 Hz ... 60.1 Hz) |
| Kiwango cha ESD | (D) Electrostatically conductive |
| Upana [w] | 40.59 mm |
| masafa | 10 - 150 - 10 Hz |
| Urefu [h] | 14.6 mm |
| Urefu [l] | 8.57 mm |
| Ubunifu wa Pin | Linear Pin Arrangement |
| Aina ya Mshtuko | Semi-sinusoidal |
| Uchunguzi | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Mizunguko ya Kuziba | 25 |
| Kasi ya kufagia | 1 octave/min |
| Kuongeza kasi | 5g (60.1 Hz ... 150 Hz) |
| Ujenzi | Suitable component for Through Hole Reflow |
| Mstari wa Bidhaa | COMBICON Connectors M |
| Aina ya Bidhaa | Printed circuit board base housing |
| Kipenyo cha shimo | 1.6 mm |
| Mapitio ya Makala | 01 |
| Upana wa Mkanda [W] | 56 mm |
| Idadi ya safu mlalo | 1 |
| Urefu wa Jumla | 12 mm |
| Familia ya Bidhaa | CCV 2.5/.. -GF |
| Mkazo wa joto | 105 °C/168 h |
| Flange ya kubana | Overhead clamping (thread) |
| Rangi (Nyumba) | Grey (7042) |
| Idadi ya nguzo | 6 |
| Maelekezo ya Mtihani | X, Y, and Z axes |
| Nyenzo ya mawasiliano | Cu Alloy |
| Mpango wa Vipimo | |
| Idadi ya mizunguko | 25 |
| Aina ya ufungaji | THR welding/wave welding |
| Kipenyo cha Koili [A] | 330 mm |
| Uchovu wa kutu | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Vipimo vya Hekalu | 1 x 1 mm |
| Kukaza torque | 0.3 Nm |
| Aina ya kifungashio | 56 mm wide strap |
| Upinzani wa mguso | 1 mΩ |
| Mkondo wa Majina KATIKA | 12 A |
| Volti ya kawaida ya Umoja wa Mataifa | 320 V |
| Aina ya kufungasha nje | Dry bag |
| Vipimo vya Mtihani | DIN EN 60512-1-1:2003-01 |
| Volti ya AC inayoweza kubebeka | 2.21 kV |
| Nyenzo za kuhami joto | LCP |
| Urefu wa Pini ya Kulehemu [P] | 2.6 mm |
| Idadi ya uwezo | 6 |
| Upinzani wa Kuwasiliana R1 | 1 mΩ |
| Upinzani wa Kuwasiliana R2 | 1 mΩ |
| Muda wa ajali | 18 ms |
| Idadi ya miunganisho | 6 |
| Nguvu ya programu-jalizi takriban. | 8 N |
| Volti ya kawaida (II/2) | 400 V |
| Idadi ya nguzo zilizojaribiwa | 12 |
| Volti ya ukubwa (III/3) | 250 V |
| Muda wa jaribio kwa kila mhimili | 2.5 h |
| Sifa za Uso | Galvanically tinned |
| Kiwango cha Unyevu Kinachoathiriwa na Unyevu | MSL 1 |
| Data kuhusu Michakato ya Kulehemu | Processing in reflow soldering processes in accordance with IEC 60068-2-58 or DIN EN 61760-1 (current version, respectively)Moisture Sensitive Level (MSL) = 1 according to IPC/JEDEC J-STD-020-C |
| Kikundi cha nyenzo za kuhami joto | IIIa |
| Mizunguko ya kulehemu. kwa reflux | 3 |
| CTI kulingana na IEC 60112 | 175 |
| Volti ya vipimo (III/2) | 320 V |
| Halijoto ya Mazingira (Huduma) | -40 °C ... 105 °C (depending on the rating curve) |
| Uainishaji wa Joto Tc | 260 °C |
| Halijoto ya Mazingira (Kuweka) | -5 °C ... 100 °C |
| Vipimo vya Koili ya Nje [W2] | 62.4 mm |
| Volti ya muda mfupi ya nominella (II/2) | 4 kV |
| Ukubwa wa Voltage ya Insulation (II/2) | 400 V |
| Volti ya muda mfupi ya nominella (III/2) | 4 kV |
| Volti ya muda mfupi ya nominella (III/3) | 4 kV |
| Ukubwa wa Voltage ya Insulation (III/2) | 320 V |
| Ukubwa wa Voltage ya Insulation (III/3) | 250 V |
| Thamani ya chini kabisa ya mstari wa kuteleza (II/2) | 4 mm |
| Volti ya mshtuko inayoweza kubebeka katika usawa wa bahari | 4.8 kV |
| Eneo la kulehemu la uso wa chuma (safu ya juu) | Tin (3 - 5 μm Sn) |
| Thamani ya chini kabisa ya mstari wa kuteleza (III/2) | 3.2 mm |
| Thamani ya chini kabisa ya mstari wa kuteleza (III/3) | 4 mm |
| Idadi ya Pini za Solder kwa Kila Uwezo | 1 |
| Uchunguzi kuhusu operesheni | According to DIN EN 61984, COMBICON connectors are connectors without switching power (COC). In the event of use as prescribed, they must not be plugged in or unplugged under voltage or under load. |
| Kishikilia Mawasiliano KilichotumikaMahitaji >20 N | Approved Test |
| Upinzani wa Insulation Nguzo Zilizo Karibu | > 5 MΩ |
| Volti ya muda mfupi ya vipimo (II/2) | 4 kV |
| Darasa la kuwaka kulingana na UL 94 | V0 |
| Nishati inapoondolewa kwa kutumia nguzo takriban. | 6 N |
| Volti ya Muda ya Vipimo (III/2) | 4 kV |
| Volti ya muda mfupi ya vipimo (III/3) | 4 kV |
| Eneo la mguso wa uso wa chuma (safu ya juu) | Tin (3 - 5 μm Sn) |
| Halijoto ya Mazingira (Uhifadhi/Usafiri) | -40 °C ... 70 °C |
| Eneo la Kugusa Uso wa Chuma (Safu ya Kati) | Nickel (1.3 - 3 μm Ni) |
| Eneo la Kuchomea Chuma Uso (Safu ya Kati) | Nickel (1.3 - 3 μm Ni) |
| Unyevu wa hewa (uhifadhi/usafiri) | 30 % ... 70 % |
| Upinzani dhidi ya mikondo ya uvujaji (DIN EN 60112 (VDE 0303-11)) | CTI 175 |
| Thamani ya Chini Zaidi ya Umbali wa Insulation ya Hewa - Sehemu Isiyo na Sawa (II/2) | 3 mm |
| Thamani ya Chini Zaidi ya Umbali wa Kinga Hewa - Sehemu Isiyo na Uwiano (III/2) | 3 mm |
| thamani ya chini kabisa ya umbali wa insulation ya hewa - uwanja usio na usawa (III/3) | 3 mm |
Maelezo ya Bidhaa
Printed circuit board base housing, nominal section: 2.5 mm², color: gray, nominal current: 12 A, nominal voltage (III/2): 320 V, contact surface: Tin, contact type: Male, number of potentials: 6, num
Vipengele Muhimu
- Ubora wa kiwango cha viwanda
- Inaendana na RoHS
- Imethibitishwa CE
- Dhamana ya mwaka 1
Nyaraka za Bidhaa
Jalada la data
Speci za kiufundi na data ya utendaji
Mwongozo wa Mtumiaji
Mwongozo wa usakinishaji na uendeshaji
